Garage Tek GT5013DE Einbauanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Einbauanleitung für Automobilelektronik Garage Tek GT5013DE herunter. Garage Tek GT5013DE 4 Seiten. Dual laser

STEP 1

STEP #1: CHECK PARTS RECEIVED.

STEP #2: PARK BOTH VEHICLES IN THE POSITIONS YOU WISH TO REPEAT IN THE FUTURE AND SELECT AN

AREA (WHERE YOU CAN SEE WHEN IN THE DRIVER'S SEAT) WHERE THE LASER CAN SHINE. A POSSIBLE

LOCATION MIGHT BE ON THE DASHBOARD JUST INSIDE THE WINDSHIELD.

STEP 3

STEP #3: REMOVE THE LASER UNIT FROM THE MOUNTING PLATE (DEPRESS TAB AND SLIDE TOWARD THE

TAB) AND SCREW THE MOUNTING PLATE INTO THE CIELING. SLIDE THE LASER UNIT BACK ONTO THE

MOUNTING PLATE.

IT IS NOT RECOMMENED TO USE THE FOAM TAPE FOR PERMANENT MOUNTING.

LOCATE THE LASER UNIT WITHIN THE DISTANCE OF THE POWER CORD LENGTH TO AN

ELECTRICAL OUTLET, POSSIBLY THE ONE LOCATED IN THE OVERHEAD GARAGE DOOR

OPENER.

THE DUAL LASER GUIDE HAS BARRELS THAT ROTATE UNIVERSALLY. ie. LEFT / RIGHT AND

FORWARD / BACKWARD. THE GUIDE CAN BE LOCATED ANYWHERE, AS LONG AS THE LIGHT

BEAMS ARE UNOBSTRUCTED TO SHINE ON THE SELECTED AREAS OF STEP 2.

PG 2

DUAL LASER PARKING GUIDE - ASSEMBLY INSTRUCTIONS

QUESTIONS ???? CALL 1-866 664 2724

STEP 2

STEP 3

REV 1, 12/11