CORNING SCRN-510 Hardware-Installationshandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Hardware-Installationshandbuch für Netzwerk-Hardware CORNING SCRN-510 herunter. CORNING SCRN-510 17 Seiten. Small cell radio node

Seite drucken

Compliance

The SCRN-510 complies with the standards listed in

Mounting the Radio Node

Radio Nodes can be installed on walls and below ceilings with the factory-provided brackets. When mounting

a radio node vertically on a wall, position the fans on the upper side of the SCRN-510. The factory-provided

wall-mount bracket can tilt the SCRN-510 down at the following angles:

SCRN-510 tilt options.

0°

NOTE: Always consult and follow local codes for mounting and wiring Corning equipment.

When possible, locate downward-radiating radio node units at least 0.5 meters (20 inches) from external

walls. This distance maximizes indoor coverage and minimizes RF leakage outside the building. When mount-

ing near a wall or other obstruction, orient the mounting bracket so that the top of the SCRN-510 faces

towards the coverage area and faces away from the wall.

Corning Restricted and Confidential Proprietary - Controlled content

SCRN-510 Hardware Installation Guide | DOC-SCRN-510-HIG_i4 | 16 October, 2020 | Page 10

Table

Table 3 SCRN-510 Compliance

TUV Safety (Including UL-62368-1 2nd

Safety

Edition)

FCC Compliant - Part 15 (Class A), Part 30

MPE: FCC 47 CFR 1.1310

UR: FCC 47 CFR 1.1307(b)

15°

Figure 5

Mounting Bracket Downtilt Options

0°, 15°, 30° and 45°.

30°

45°

Figure 5

shows the