Ikegami PCS-436 Schnellstart-Handbuch

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Sicherheitskamera Ikegami PCS-436 herunter. Ikegami PCS-436 11 Seiten. How to control with sdr-500series dvr

Seite drucken

How to Control PCS-418/426/436 with SDR-500series DVR

1. Connect the AC24V ,Video and RS-485 wire for PCS-418/426/436 as page 8

of PCS-400P Series Dome Installation & Set-up Guide.

Red wire: 24V AC Live, Blue wire: 24v ac Neutral,

Yellow wire: RS-485(A)+, Green wire:RS-485(B)-,

Coax: Video signal

2. Also connect above RS-485 wire and Video cable(BNC) to rear side of

SDR-500 Series as page 9 of User's Manual SDR-500 Series.

The Video out of SDR-500 series should be connect to the Video monitor,

3. After Power on PCS-400P series camera, SDR-500 series DVR and Monitor,

you can see the below screen. Should be used the USB mouse for controlling

and set-up (by connecting front side of SDR-500 Series).