Makita 4350FCT Technische Informationen - Seite 4

Blättern Sie online oder laden Sie pdf Technische Informationen für Elektrowerkzeug Makita 4350FCT herunter. Makita 4350FCT 14 Seiten. Jig saw
Auch für Makita 4350FCT: Spezifikationen (2 seiten), Aufschlüsselung der Teile (3 seiten), Gebrauchsanweisung (13 seiten), Gebrauchsanweisung (13 seiten), Gebrauchsanweisung (13 seiten)

epair

[5] Disassembling Gear housing cover section

1. After separating Safety wire from Gear housing cover, remove four CT 4x16 Tapping screws.

Gear housing cover and Packing are separated from Gear housing with Motor housing as illustrated in Fig. 6.

Fig. 6

CT 4x16 Tapping screws

2. Remove Stop ring E-3 with slotted screwdriver.

Push Slider to the lower dead point. (Fig. 7)

Fig. 7

Inside of Gear housing cover

Slider

Pin 4

Rod

3. Slide Pin 4 in order to disconnect Rod with Slider. And then, pull out Rod from Gear housing cover.

Separate Linear guides from Gear housing by removing four M4x10 Pan head screws.

Pin 4, Slider and Leaf spring are disassembled from Gear housing cover. (Fig. 8)

Fig. 8

Linear guides

Slider

Pin 4

Note: Pay attention to the direction of Leaf spring illustrated above when reassembling.

Gear housing cover

Packing

Stop ring E-3

Rod

Gear housing cover

Rod

Gear housing

Slider in the lower

dead point

Linear guides

Leaf spring

Slider

Pin 4

M4x10 Pan head

screws

P 4 / 14