CORNING ONE GX Schnellinstallationsblatt - Seite 5

Blättern Sie online oder laden Sie pdf Schnellinstallationsblatt für Messgeräte CORNING ONE GX herunter. CORNING ONE GX 14 Seiten. Higher power 40 w dual-band wcs/2.5 ghz tdd das remote
Auch für CORNING ONE GX: Handbuch für allgemeine Informationen (12 seiten)

Seite drucken

REQUIRED HEADEND CONNECTIONS FOR

DEPLOYMENTS WITH CORNING® OPTICAL

NETWORK EVOLUTION (ONE™) SOLUTION

(CONTINUED)

Step 1:

Refer to Figure 2 and connect the HEU to the

OCH using the ERFCv2-OCH cable as follows:

• Connect the 9-pin connector side of the ERFCv2-

OCH cable to an available HEU RIX port and secure

the connector in place.

• UL/DL QMA connections:

– Each ERFCv2-OCH cable supports UL/DL

connections to up to three OCH-4-WDM units or

one OCH-8-WDM unit + one OCH-4-WDM unit.

– Connect one pair of the ERFCv2-OCH cable UL/DL

QMA connectors to the OCH rear panel UL and

DL QMA "RF Interface" connectors.

Note that each UL/DL pair connects to one OCH

optical module (OPTM), where each OPTM supports

up to four SISO remotes.

Figure 2. HEU-to-OCH Connections via ERFCv2 Cable

Step 2:

Connect the SC-450 front panel "LAN" port

to the any one of the control module's

(HCM/ACM) four "INTERNAL" ports using the

RJ45 CAT 5 Ethernet cable, as shown in Figure 3.

Corning Optical Communications

Figure 3.

Quick Installation Sheet | CMA-581-AEN | Page 5