CORNING 80-6113-8081-9 Gebrauchsanweisung Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung Handbuch für Racks & Ständer CORNING 80-6113-8081-9 herunter. CORNING 80-6113-8081-9 8 Seiten. Pole, wall, and pedestal mounting kits for fiber dome terminal and closure series fdc/fdtc/fdst 08m & 08s

Seite drucken

1.0 INTRODUCTION

The Pole, Wall and Pedestal Mounting Kits can be used for mounting Fiber Dome Terminals and Closures FDC/FDTC/FDST

08M and 08S series to Emerson BD4 & BD5 and Channel MAH1010 pedestals.

2.0 KIT CONTENTS

Kit Contents Pole/Pedestal/Wall Mounting Bracket

FDC-08M-PED-BRKT (80-6113-8081-9)

A. Mounting bracket assembly

B. Screw, carriage ¼-20 x 1.0" (1)

C. Nut, ¼-20 (1)

D. Plastic screw retainer (1)

E. Instruction Manual 78-0013-4546-7-A (not shown)

Kit Contents Pole/Pedestal/Wall Mounting Bracket

FDST/FDT-08-POLE/PED-HB (80-6113-3205-9)

A. Mounting bracket assembly

B. Cable tie (21" releasable)

C. Screw, carriage ¼-20 x 1.0" (1)

D. Nut, ¼-20 (1)

E. Cable tie 8" long (2)

F. Plastic screw retainer (1)

G. Lanyard

H. Instruction Manual 78-0013-4546-7-A (not shown)

Note: Visually inspect all components. If any component is missing or appears damaged, do not install. Call Corning

Customer Care at 800-743-2675 for a replacement product.

3.0 EMERSON BD4 AND BD5 PEDESTAL INSTALLATION USING FIBER DOME

TERMINAL AND CLOSURE MOUNTING KIT FDC-08M-PED-BRKT

3.1 Remove the pedestal cover. Remove pedestal components that may interfere with installation. Carefully knock out

the .28" square knockout located approximately 17" from the top of the pedestal. Install the supplied carriage bolt with

the head on the outside of the pedestal. Secure the bolt using the plastic screw retainer washer. Mount the bracket as

shown and secure with nut. Torque to 35 ± 5 in.-lbs.

Note: Some components removed from photograph for clarity.

Standard Recommended Procedure 78-0013-4546-7 | Issue 2 | October 2019 | Page 2 of 8