Avante U-3000 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kartenleser Avante U-3000 herunter. Avante U-3000 13 Seiten.

INTRODUCTION

will blink intermittently when the system is working properly. The red LED will turn on steady when the reader is

being charged, and will turn off automatically once the charge is completed. In addition the red LED will blink

intermittently when the unit is plugged into the wall outlet via the power supply and turned ON to indicate it is

being charged while being operated.



Press the F1 key to switch the unit to "Manual" read mode.



Press the F2 key to switch the unit to "Automatic" read mode.



Press the F3 key to enter the Main Menu. Press the CL key to exit sub-menus or to exit from the Main

Menu screen.



The F4 key is used to set the unit for "Inventory" mode (Continuous Test Read Mode). Press the following

keys on the keypad in the exact order to set the unit for "Continuous Test Read Mode":

Up arrow key,

There are 5 submenus on the Main Menu screen.

EPC GEN2



Record List



Save to SD



System Setting



About Us



The UHF-900 Reader is a passive RFID card reader capable of handling up to four

antenna connections for multi-switch reading mode. A LCD screen and simple keypad

are available for easy user operation. Data ports are located on the bottom of the

reader and these include 1 power port, 1 power ON/OFF switch, 1 SD card slot, 1

Ethernet port, and 1 USB port.

In addition, 2 LED lights are located between the LCD screen and keypad to inform the

user if the unit is working properly or when the unit is being charged. The green LED

Four function keys are located on the top area of the keypad. Use these keys to set the

unit's operational mode and other settings. The unit will enter the "Automatic" read

mode when it is first turned ON; this is the default setting.

Down arrow key,

U-3000 Reader

Left arrow key (*),

Right arrow key (#), CL, OK, and F4.

2011

6 |

P a g e