CORNING EDGE EDGE-BKT-LR-2RU Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch für Racks & Ständer CORNING EDGE EDGE-BKT-LR-2RU herunter. CORNING EDGE EDGE-BKT-LR-2RU 6 Seiten. Rackless mounting kits

Seite drucken

2.4

Ladder Rack Mounting Kit 4U (EDGE-BKT-LR-4RU)

• (1) Bottom plate / (2) omega brackets and (2) support

bars preinstalled

Tools and Materials Required

• Phillips screwdriver

Kit Preparation

Before installing the kit into the wire tray or ladder rack, determine the number and size of the housings to be

installed into the kit. Housing installation begins at the top of the kit.

2U Mounting Kit accepts:

(1) EDGE-02U

(2) EDGE-01U

Step 1:

If less than the full capacity of housings will be installed into the kit, move the support bars from

their factory-installed positions so that they are positioned just below the lowest housing that will be

supported.

Step 2:

Install the kit into the wire tray or ladder rack as described in Section 5 or 6.

Step 3:

Then mount the housings, beginning at the top of the kit. Ensure that the lowest housing rests on the

support bars.

TPA-5841

TPA-5832

4U Mounting Kit accepts:

(1) EDGE-04U

(2) EDGE-02U

(4) EDGE-01U

(2) EDGE-01U and (1) EDGE-2U

Standard Recommended Procedure 003-809 | Issue 7 | May 2017 | Page 2 of 6

Figure 1