CORNING Pretium EDGE Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch für Racks & Ständer CORNING Pretium EDGE herunter. CORNING Pretium EDGE 4 Seiten. Rackless

Seite drucken

NOTE: Calculate these dimensions carefully. Once the housing is installed, any adjustment needed

along the Z axis will require that the housing be removed.

Step 4:

Once the kit is secured in position, install the EDGE-01U or EDGE-04U housing, as

applicable, or any other device that has the ability to be installed into a 19-inch rack

space, by securing the mounting brackets on each side into the mounting holes on front

of the kit. If installing only one housing, place it in the top position.

Step 5:

To prevent the top housing from tilting in the rack, insert screws into the sides of the

housing as shown in Figure 4.

Waterfall Kit Installation

(Applies to 1U Housing ONLY) Open door and pull shelf out to access the underside of the shelf.

Attach waterfalls to each side of the shelf (Figure 5) with screws on the underside.

NOTE: If additional 1U housings are to be installed, contact Corning Cable Systems Customer

Services to purchase additional waterfalls.

Corning Cable Systems LLC √ PO Box 489 √ Hickory, NC 28603-0489 USA

1-800-743-2671 √ FAX +1-828-325-5060 √ International +1-828-901-5000 √ http://www.corning.com/cablesystems

Corning Cable Systems reserves the right to improve, enhance, and modify the features and specifications of Corning Cable Systems' products without prior notification.

Pretium EDGE is a trademark of Corning Cable Systems Brands, Inc.All other trademarks are the properties of their respective owners. Corning Cable Systems is ISO 9001

certified.

STANDARD RECOMMENDED PROCEDURE 003-809 | ISSUE 4 | DECEMBER 2011 | PAGE 4 OF 4

~4.5 inch

Figure 4 — Install Rackless Ladder Rack Kit (2U or 4U)

4-40 x .125 screws

Figure 5 — Attach Waterfalls to 1U Housing

~4.5 inch

KPA-2383

KPA-2