Avantes AvaLight HAL Mini Handbuch - Seite 12

Blättern Sie online oder laden Sie pdf Handbuch für Beleuchtungsanlagen Avantes AvaLight HAL Mini herunter. Avantes AvaLight HAL Mini 18 Seiten.

5. Changing the light source bulb

1. Disconnect the power connector from the socket.

2. Remove the screw protection caps on the front side.

3. Remove the screws with the torx screwdriver (Torx T10) (delivered with AvaLight).

4. Take out the front plate with mount plate (lamp house with PCB are attached to it).

5. Remove the lamp socket:

6. Disconnect the connector of the lamp socket.

7. Replace the lamp socket; WARNING: do not touch the glass with your fingers.

8. Put back the lamp socket into the lamp house.

9. Reconnect the connector of the lamp socket into the connector of the PCB.

Revision: 1-01

www.avantes.com