Ikegami Unicam HD HDK-55 Broschüre & Specs - Seite 4
Blättern Sie online oder laden Sie pdf Broschüre & Specs für Camcorder Ikegami Unicam HD HDK-55 herunter. Ikegami Unicam HD HDK-55 4 Seiten. 16-bit full digital hdtv portable camera system
Seite drucken16-bit Full Digital HDTV Portable Camera System
Ra ngs
HDK-55
1080i (59.94Hz or 50Hz) Y,Pb,Pr 4:2:2 Interlaced
Image Sensors
2/3-inch 2.3 million pixel AIT CCD
2/3-inch RGB prism, f1.4
Lens Mount
BTA- S1005B
Filter
(servo)
Electronic Color
Ambient Temperature
-20
+45 (-4°F
30%
90% (Non-condensing)
DC +11
16V
Weight
Approx 4.5kg (9.92lbs) (Head + FA or TA, excluding VF)
Dimensions
W138.5 x H270 x D337mm (Head + FA or TA, excluding VF)
(W5.5 x H10.62 x D13.25 inches)
F10 (1080/59.94i) / F11 (1080/50i) typical at 2000 lx
S/N
60dB typical (HDTV)
1000TV lines
45% or more
Variable Color Temperature 2,000K
20,000K variable
1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000
5 lines
Horizontal
Boost frequency: 13MHz
Gamma
OFF, 0.35, 0.4, 0.45
Gain
-6, -3dB, 0dB, +3dB, +6dB, +9dB, +12, +18dB
Input Signals
External Sync Signal
SYNC 0.6Vp-p ±6dB 75ohm 1ch
* DTA-55 does not have external sync signal input in
Audio Signal
-60dB
+4dB (Variable) / -20dB (Fixed) 2ch (600
ohm Balanced)
Intercom Signal
XLR Type or 110 Type CN 2ch
Output Signals
Analog Video Signal
R, G, B D-Sub CN 1ch (for System Expander)
HD SDI Signal
with FA-55
Serial Digital 75 ohm 1ch
with DTA-55
Serial Digital 75 ohm 1ch
* The output signal should be fixed with main video
Q-TV Signal
with FA-55
VBS signal 1ch
with DTA-55
SD-SDI signal 1ch
AUX OUT Signal
VBS signal 1ch
(QTV-1, QTV-2, or Main video selectable by menu)
* Available with FA-55 only.
* QTV-2 can not be selected if BS/CCU does not
support 2 channels of QTV.
MON Video Signal
ohm BNC 1ch
Intercom Signal
0 dBs 4ch (ENG/PROD/PGM1/PGM2) XLR Type or
110 Type CN
DC Output
+12VDC 500mA (max), 4-pin type 1ch
1
2
3
4
ND
100%
25%
6.2%
1.6%
A
B
C
D
ECC
3200K 4300K 6300K 8000K
113°F)
22MHz (HDTV)
Ra ngs
BSF-55/BST-55
Input Signals
External Sync Signal
1ch (HDTV/SDTV auto detect)
HDTV: PS 1Vp-p 75ohm bridged or Tri-sync signal
Return Video Signal
HD/SD-SDI: 75ohm single end 2ch
(HD/SD SDI Selectable)
VBS: 75ohm single end 2ch
Q-TV Signal
BSF-55
VBS 75ohm single end 1ch
BST-55
SD-SDI 75ohm single end 1ch
Intercom(ENG/PROD) 4-wire or Clearcom or RTS
4-wire
0dBm 600 ohm 2ch
Clearcom
-15dBs 200 ohm 2ch
RTS
0dBs 200 ohm 2ch
PGM(Program Sound) 0dBs 600 ohm/10k ohm switchable 2ch
Tally
R/G 2ch
Output Signals
[Main Video Signal]
HD-SDI/SD-SDI Signal
HD-SDI(SMPTE292M) /SD-SDI(SMPTE259M) 75ohm
2ch 4 outputs (HD-SDI/SD-SDI selectable)
VBS Signal
1.0Vp-p 75ohm 1ch 2 outputs
[PM Signal]
Serial Digital 75 ohm BNC 1ch 1 output (MENU
HD-SDI/SD-SDI Signal
SELECTION)
SDTV Analog Signal
1.0Vp-p 75ohm BNC type 1ch 1 output
[WFM Signal]
HD-SDI/SD-SDI Signal
Serial Digital 75ohm 1ch (HD-SDI/SD-SDI selectable)
Phase Reference Signal
75 ohm single end Analog 1ch
HDTV: Tri-Sync(0.6Vp-p) / SDTV: HV(2Vp-p) (MENU
SELECTION)
Intercom(ENG/PROD) 4-wire or Clearcom or RTS
4-wire
0dBm 600 ohm 2ch
Clearcom
-15dBs 200 ohm 2ch
RTS
0dBs 200 ohm 2ch
MIC
0dBs/+4dBs 2 ch 2 outputs Low impedance (MENU
SELECTION)
Tally
R/G 2ch, OPEN (OFF) / GND (ON) 50mA (max)
Data Trunk
RS-422 1ch
* In case of the BST-55, the data trunk channel is
not supported as standard.
Dimensions
W483 x H66.4 x D405 mm
(W19.00 x W2.63 x D16.00 inches) (excluding protrusions)
Weight
BSF-55
Approx. 7kg (15.43 lbs)
BST-55
Approx. 8kg (17.64 lbs)
Ambient Temperature
0
+40 (32°F
30%
90% (Non-condensing)
AC100V to 120V / 200V to 240V ±10%
BSF-55
Approx. 55VA (BS only)
Power for camera head: less than 180VA
BST-55
Approx. 80VA (BS only)
Power for camera head: less than 180VA
Maximum Cable Distance
FA-55/BSF-55
2000m with 9.2mmφ Fiber Cable
DTA-55/BST-55
800m with Fujikura 8.8mmφ Triax Cable
104°F)
U228B143-ED