Avantgarde DUO SD Benutzerhandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Redner Avantgarde DUO SD herunter. Avantgarde DUO SD 19 Seiten.
Seite drucken
SAFETY PRECAUTIONS
ON INSTALLATION
The
power
to
all
components
must
disconnected from the household AC) before
connections.
To prevent malfunction/defects, do not operate components with
open input/output terminals.
Control the polarity of speaker cables! Never mix up "+" and "–".
Wrong polarity will deteriorate the sound quality and can damage
amplifier and the active power module of the subwoofer.
Do not short circuit the +/– electric poles of the speaker cables.
Use high quality cable with solid speaker plugs (spades, bananas
etc).
be
switched
"off "
(or
PASSIVE CROSSOVER
making any audio
ITRON AMPLIFIER
ITRON MAINS
DSP BASS AMPLIFIER
DSP BASS MAINS
14
15
AMP SWITCH
MID
HIGH
MID
IN
OUT
SPEAKER TYPE
UNO G3
DUO G3
MODEL NO.
PASSIVE CROSSOVER SWITCH
only to be used with marked speaker type
ORIGIN
MADE IN GERMANY
1 1
SPEAKER TYPE
UNO G3
DUO G3
PUSH
MODEL NO.
ITRON AMP
ORIGIN
MADE IN GERMANY
only to be used with marked speaker type
+ 1.5
+ 1.5
0dB
ENGAGED
FUSE
– 1.5
– 1.5
RESET
MID
HIGH
IN
OUT
E FUSE
DRIVER GAIN
BALANCED INPUT
1 2
FUSE
1 3
SPEAKER TYPE
UNO SD
DUO SD
VOL
MODEL NO.
BASSAMP-G3-500
ORIGIN
MADE IN GERMANY
only to be used with marked speaker type
CLIP
SIG
DSP
VOL
DSP PROGRAMMING
1 4
SERVICE USE ONLY
PUSH
GROUND
OUT
IN
B
C
A
D
RESET
12V DC
ENGAGED
MODE
TOGGLE
INPUT
FUSE
TRIGGER
POWER
E FUSE
DIMMER
BALANCED SIGNAL
FUSE
1 5
MID
MID
CONNECTION
OF EXTERNAL
POWER AMPLIFIER
WARNING
ELECTRICAL SHOCK HAZARD
DO NOT OPEN!
110 – 240V ~ 50/60HZ
MAX POWER CONSUMPTION – 570W
POWER OUTPUT – 530W RMS
FUSE 2.5 A SLOW
+ 1.5
+ 3
+ 6
0dB
0dB
– 1.5
– 3
– 6
TOTAL GAIN
CONNECTION
OF EXTERNAL
PRE AMPLIFIER
SPKR BRIDGE
FOR
DSP BASS AMP
WARNING
ELECTRICAL SHOCK HAZARD
DO NOT OPEN!
110 – 240V ~ 50/60HZ
MAX POWER CONSUMPTION – 550W
POWER OUTPUT – 500W RMS
FUSE 4.0 A SLOW
SERVICE USE ONLY
SPEAKER LEVEL INPUT
BALANCED
BRIDGE FOR
SPKR
MUTE
DSP BASS AMP
XLR
OUTPUT
INPUT SELECT