Makita 9820-2 Gebrauchsanweisung - Seite 4

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Elektrowerkzeug Makita 9820-2 herunter. Makita 9820-2 8 Seiten. 200 mm (7-7/8") sharpener
Auch für Makita 9820-2: Broschüre (1 seiten), Gebrauchsanweisung (17 seiten)

Seite drucken
Makita 9820-2 Gebrauchsanweisung
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product.
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.

FUNCTIONAL DESCRIPTION

CAUTION:
Always be sure that the tool is switched off and
•
unplugged before adjusting or checking function
on the tool.
Switch action
CAUTION:
Before plugging in the tool, always check to see
•
that the tool is switched off.
007285
To start the tool, press the "ON" side of the switch
located on the front of the tool. To stop the tool, press
the "OFF" side of the switch.
ASSEMBLY
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before carrying out any work on the
tool.
Replacing grinding wheel
Use the wrench provided to release the grinding wheel
by turning the installation screw counterclockwise.
2
3
007270
1. Switch
1
1. Wrench
2. Grinding wheel
installation
1
screw
3. Wheel
To install the grinding wheel, follow the removal
procedure in reverse.
Adjusting wheel guard
The top of the wheel guard should be 1 mm below the
surface of the grinding wheel. Adjust height by turning
the guard clockwise to lower it, or counterclockwise to
raise it.
3
1mm
(3/64")
007271
Wiping off the antirust
Wipe off the antirust on the sharpening platform guide
(rail) and the sharpening holder. Coat the sharpening
platform guide and the sharpening holder with machine
oil or spindle oil.
Removing or installing sharpening platform
guide
To remove the sharpening platform guide, loosen the
screw and slip the set plate aside.
1
2
007272
Loosen the pole fastening screws counterclockwise and
lift off the sharpening platform guide.
1
2
3
007273
To install the sharpening platform guide, follow the
removal procedure in reverse.
4
1. Grinding wheel
1
2. Wheel guard
3. Lower
4. Raise
4
2
1. Slip aside
2. Set plate
1. Sharpening
platform guide
(Rail)
2. Pole
3. Pole fastening
screw