HIKVISION DS-73HUHI-F4/N Series Schnellstart-Handbuch - Seite 9
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für DVR HIKVISION DS-73HUHI-F4/N Series herunter. HIKVISION DS-73HUHI-F4/N Series 17 Seiten.
Seite drucken
9
S E T U P H I K - C O N N E C T P 2 P C L O U D S E R V I C E ( c o n t i n u e d )
2.
To see a device's video stream on the Hik-Connect or iVMS-4500 mobile app, add the device.
1)
2)
3)
10
A D D I N G C A M E R A S
•
Adding Analog Cameras
Analog cameras are enabled by default; no further action is required.
Disabling Analog Cameras To Increase Number of IP Cameras
•
Disabling an analog camera allows substitution of a network (IP) camera in its place, up to 10 IP
cameras maximum for DS-7308HUHI-F4/N and up to 18 IP cameras maximum for
DS-7316HUHI-F4/N.
1. Go to MENU > CAMERAS > ANALOG (TAB).
2. Analog Camera List will display all enabled cameras.
3. Disable analog cameras in the Analog Cameras Enable Status section:
-
-
4. Press APPLY to save settings.
Adding IP Cameras
•
1. Right click a window in Live View mode to display the menu.
2. Online cameras in the same network segment will be detected and displayed in the camera list.
3. Select camera and click the
One-Touch Adding button to add first two cameras in list of three or more (w/same admin
password).
NOTE: Make sure the camera to add has been activated by setting the admin
Login to Hik-Connect mobile app with your user name, e-mail, or mobile number and password.
On the Home screen, click the "+" button (upper right corner).
Enter the device's information.
If you have the device's QR Code: Use the QR Code Scanner to scan the device's QR Code.
If you do not have the device's QR Code: Enter the device information manually:
a. Click the Edit (pencil) icon on top right corner.
b. Enter device serial number (device must be online), then click the OK button.
c. When the device appears on the "Results" screen, click the Add button.
d. Enter device's 6-character Verification Code (all upper case), then click the OK button.
e. Click the Finish button.
Uncheck the camera checkbox of any camera(s) you wish to disable.
Check the Analog checkbox to disable/enable all analog cameras.
password, and the camera's admin password is the same as the DVR's.
button to add it (using DVR's admin password), or click the