Makita 9910 Gebrauchsanweisung - Seite 6

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Elektrowerkzeug Makita 9910 herunter. Makita 9910 13 Seiten. 76mm
Auch für Makita 9910: Aufschlüsselung der Teile (3 seiten), Gebrauchsanweisung (17 seiten), Aufschlüsselung der Teile (3 seiten), Gebrauchsanweisung (8 seiten), Gebrauchsanweisung (8 seiten), Technische Informationen (5 seiten), Gebrauchsanweisung (17 seiten)

more than 8mm

1. Steel plate

2. Adjusting screw

1. Dust spout

2. Dust bag

1. Optional hose 28 mm in inner

diameter

2. Hose of vacuum cleaner

3. Vacuum cleaner

003378

CAUTION:

•

When installing the belt, make sure that the direction of the arrow on the

back of the belt corresponds to the one on the tool itself.

Adjusting belt tracking

004233

Switch on the tool and make sure that the belt is aligned properly. If the edge

of the belt extends beyond the edge of the steel plate or the edge of the belt

retracts more than 8 mm away from the edge of the steel plate, use the adjust-

ing screw to adjust the belt tracking.

Dust bag

003387

Attach the dust bag onto the dust spout. The dust spout is tapered. When

attaching the dust bag, push it onto the dust spout firmly as far as it will go to

prevent it from coming off during operation.

When the dust bag is about half full, remove the dust bag from the tool and pull

the fastener out. Empty the dust bag of its contents, tapping it lightly so as to

remove particles adhering to the insides which might hamper further collec-

tion.

NOTE:

•

If you connect a Makita vacuum cleaner to this tool, more efficient and

cleaner operations can be performed.

Connecting to Makita vacuum cleaner

004050

Cleaner sanding operations can be performed by connecting the belt sander to

Makita vacuum cleaner.

When connecting to Makita vacuum cleaner, an optional hose 28 mm in inner

diameter is necessary.