HIKVISION DS-7604 Series Schnellstart-Handbuch

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für DVR HIKVISION DS-7604 Series herunter. HIKVISION DS-7604 Series 6 Seiten.

Seite drucken

Quick Start Guide

DS-7604 Series DVR

Menu Structure

The menu structure of the DS-7604 Series DVR is as

followed:

Startup and Shutdown

Proper startup and shutdown procedures are crucial to

expanding the life of your DVR.

To start your DVR:

1. Ensure the power supply is plugged into an electrical

outlet. It is HIGHLY recommended that an

Uninterruptible Power Supply (UPS) is used in

conjunction with the unit.

2. Press the POWER switch on the rear panel. After the

power has been started up, the POWER indicator will

light green.

To shutdown the DVR:

1. Enter the Shutdown menu by clicking on Menu >

Shut down.

2. Select the Shutdown button.

3. Click the Yes button.

(V1.0.3N)

Using the Setup

Wizard

By default, the Setup Wizard will start once the DVR has

loaded. The Setup Wizard will walk you through some of the

more important settings of your DVR. If you do not wish to

use the Setup Wizard at this time, click the Cancel button.

You may also choose to use the Setup Wizard at a later time

by leaving the "Start Wizard when DVR starts?" checkbox

checked.

To start using the Setup

Wizard:

1. Click the Next button

on the Wizard

window.

This will take you to

the User Permission

window.

2. Navigate to the Admin

Password input field.

3. Enter the admin password into the Admin Password input

field. By default, the

password is 12345.

4. To change the admin

password, check the

New Admin

Password checkbox.

Enter the new

password and confirm the password in the given fields.

5. Click the Next button. This will take you to the HDD

Management window.

12. To start HDD

management, click the

Enter button.

13. If a new HDD was

recently installed,

Quick Start Guide - DS-7604 Series DVR