E-Service Nayax Installationshandbuch - Seite 9
Blättern Sie online oder laden Sie pdf Installationshandbuch für Zahlungsterminal E-Service Nayax herunter. E-Service Nayax 18 Seiten.
Seite drucken
VPOS wireless card reader mounting guide
Figure 11
1.
Place the provided template over the Thomas 3000
Print out the template on page 15 or 16 of this guide, depending onwhether you are installing the
VPOS or Onyx. Place the printed template over the Thomas machine, aligning the yellow arrow with
the indent corner as seen in figure 12.
CAUTION: Remember to print without scaling the page and use the printed ruler to
ensure that the printout is correctly sized.
2.
Drill through the faceplate as marked on the printed template
Use a center punch to mark the drill points as shown on the template.
Drill holes for the screws and one large hole for the cable to pass though, sized according to the
printed template
Optionally, you may remove the inner back plate and shorten it to the red line, rather than drilling
though it. Take care to remove the circuit board on the right of figure 13 before removing the plate.
Nayax Installation Guide
Figure 12
Figure 13
9