BERNSTEIN SHS3 Series Installations- und Betriebsanleitung - Seite 18
Blättern Sie online oder laden Sie pdf Installations- und Betriebsanleitung für Schalter BERNSTEIN SHS3 Series herunter. BERNSTEIN SHS3 Series 18 Seiten. Safety hinge switch
Installation and Operating Instructions
Switching symbol and switching diagram
Contact function
Contact element
Termination
Switching symbol &
Switching diagram
On
Off
Connecting cable with connector available optionally
as accessory (see also chapter Accessories).
Maintenance / Service
The switching device is maintenance free.
To assure a failure-free and long service life the following checks have to be carried out in regular intervals:
Firm fit of all components
-
Assured switch function
-
Condition of all seals
-
Heavy wear and tear
-
Well aligned hinge axes
-
In case that a failure is detected the whole switching device must be replaced.
Liability Disclaimer
By breach of the given instructions (concerning the intended use, the safety instructions, the installation and
connection through qualified personnel and the testing of the safety function) liability expires.
Accessories
Article number
Description
601.9390.038
SHS3-Scharnier
Connector M12x1 with jiggle protection and molded cable
Article number
Description
325.1006.291
AN-KAB.SHS3
325.1006.292
AN-KAB.SHS3
325.1006.293
AN-KAB.SHS3
325.1006.294
AN-KAB.SHS3
325.1006.295
AN-KAB.SHS3
325.1006.296
AN-KAB.SHS3
Connector straight
At an ambient temperature of +70°C and 2,5 A for the 4 wires a lifetime of 1500 hours is guarantied for the 4 wires at constant
current load.
Bernstein AG, Tieloser Weg 6, D-32457 Porta Westfalica / www.bernstein-ag.de
Connecting cable / connector socket
grey
pink
green
yellow
white
brown
Blank hinge with same dimensions, no switch enclosure
Kabellänge x
2 m
straight
5 m
straight
10 m straight
2 m
angled
5 m
angled
10 m angled
Document: 0800000455_en.doc / Updated: 1 / 3039-05
2 N.C., 1N.O. (Zb)
U15Z slow make and break contact
Point of fixation
Swap-kit to re-fixation of the switching point
Article number
399.1990.161
contains:
2 Replacement plugs
1 Special bit
1 Plastic washer
1 Installation & Operating Instructions
Date of issue: 15.12.2005 / Page 9 of 9
Point of fixation free selectable
within a range of 0° ... 270°
Tolerances:
Switching angle (N.C.) + / -1,5°
Forced disconnect torque 10%
Forced disconnect angle + / -1,5°
Description
SHS3-Swap-kit
Connector angled
Template: 0850174292 Orig. 2