ALIBI ALI-BC1720LPC Schnellinstallation und Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Schnellinstallation und Benutzerhandbuch für IP-Kamera ALIBI ALI-BC1720LPC herunter. ALIBI ALI-BC1720LPC 4 Seiten. 720p hd-tvi license plate camera

Seite drucken

In the PTZ menu, execute (Call) a Preset 95 command to open the camera OSD menu system. See

above.

The green highlighting in the OSD menu identifies the currently selected parameter. Use the buttons

in the PTZ control panel described above to navigate the OSD menus.

OSD PARAMETER DEFINITIONS

SETUP menu

VIDEO STANDARD: Click the u

•

LANGUAGE: Click the u

buttons to show either ENGLISH or (Chinese).

•

FOCUS: Click q

buttons to highlight FOCUS, and the click the Iris + to open the FOCUS screen.

•

FOCUS

In the

screen, click and hold down the

Click and hold down the u

zoom out or zoom in.

Iris +

focus in or focus out. Click

to save your settings and return to previous menu.

MAIN MENU: Highlight MAIN MENU, and then click Iris +

•

www.observint.com

Click here to Call Preset 95

NTSC or PAL.

buttons to show either

Zoom -

Zoom +

buttons or the

Focus +

Focus -

buttons or the

to open the main SETUP menu.

MAIN MENU - SETUP menu

AE: Highlight AE, and click Iris + to open to open the automatic exposure submenu.

•

Brightness: Set the brightness value from 1 .. 10 for best image.

—

AE Mode: Set to HLS (highlight suppression) or GLOBAL AE mode. If you select HLS, click

—

Iris + and then set the Level (0 .. 8).

AGC: Set the AGC to High, Middle, Low or Off for best performance under differing conditions.

—

Shutter: Set to a high shutter value as to improve the image quality when the vehicle speed is

—

very high. Default value is 1/100.

WB: White Balance. Select either Auto or Manual. If you select Manual, click Iris + and then set the

•

RGAIN (red) and BGAIN (blue) levels.

VIDEO SETTING: In the Video Setting submenu, you can set the following:

•

Contrast: Set the contrast level from 1 .. 10 for best image.

—

Sharpness: Set the sharpness level from 1 .. 10 for best image.

—

Color Gain: Set the color gain level from 1 .. 10 for best image.

—

3DNR: Select either High, Middle, Low or off for the best level of noise reduction.

—

Mirror: Set the mirror feature to H (flip horizontal), V (flip vertical), HV (rotate 180 degrees), or

—

Off (no change [default}]) as needed.

FUNCTION:

•

Detection: Detection is used to identify specific (rectangular) areas of the field of view (FOV)

—

for motion detection. You can define up to four areas (0 .. 3) for motion. For each area, you must

open a submenu to enable the area and set the position of the rectangle (horizontal and vertical

pixel offset from the upper left corner of the FOV), and size (horizontal and vertical pixel size) of

the rectangle. You can also set the sensitivity for motion detection (High, Middle, Low, Weak).

Areas enabled for detection appear as rectangles with a colored border when the OSD is open.

Masking: With Masking you can cover areas of the field of view (FOV) with an opaque

—

rectangle to protect it from being viewed or recorded. You can define up to eight areas of the

FOV (0 .. 7) for masking. For each area, you must open a submenu to enable the area and set the

buttons to

position (horizontal and vertical pixel offset from the upper left corner of the window), and size

buttons to

(horizontal and vertical pixel size) of the mask. You can also set the fill color, or select Mosaic.

Areas enabled for masking appear as rectangles filled with the color (or mosaic) as configured.

Mask represented by white rectangle

Detection area represented by white border