GARCARE GPCS06 Gebrauchsanweisung - Seite 10

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Pole Saw GARCARE GPCS06 herunter. GARCARE GPCS06 15 Seiten. Corded pole saw

Safety tips for electric pole saw

 Keep all parts of the body away from the saw chain when the chain saw is

operating. Before you start the chain saw, make sure the saw chain is not

contacting anything. A moment of inattention while operating chain saws may

cause entanglement of your clothing or body with the saw chain.

 Always hold the chain saw with your right hand on the rear handle and your

left hand on the front handle. Holding the chain saw with a reversed hand

configuration increases the risk of personal injury and should never be done.

 Hold the power tool by insulated gripping surfaces only, because the cutter

blade may contact hidden wiring or its own cord. Cutter blades contacting a

"live" wire may make exposed metal parts of the power tool "live" and could give the

operator an electric shock.

 Wear safety glasses and hearing protection. Further protective equipment for

head, hands, legs and feet is recommended. Adequate protective clothing will

reduce personal injury by flying debris or accidental contact with the saw chain.

 Do not operate a chain saw in a tree. Operation of a chain saw while up in a tree

may result in a personal injury.

 Always keep proper footing and operate the chain saw only when standing on

fixed, secure and level surface. Slippery or unstable surfaces such as ladders may

cause a loss of balance or control of the chain saw.

 When cutting a limb that is under tension be alert for spring back. When the

tension in the wood fibres is released the spring loaded limb may strike the operator

and/or throw the chain saw out of control.

 Use extreme caution when cutting brush and saplings. The slender material

may catch the saw chain and be whipped toward you or pull you off balance.

 Carry the chain saw by the front handle with the chain saw switched off and

away from your body. When transporting or storing the chain saw always fit

the guide bar cover. Proper handling of the chain saw will reduce the likelihood of

accidental contact with the moving saw chain.

 Follow instructions for lubricating, chain tensioning and changing

accessories. Improperly tensioned or lubricated chain may either break or increase

the chance for kickback.

 Keep handles dry, clean, and free from oil and grease. Greasy, oily handles are

slippery causing loss of control.

 Cut wood only. Do not use chain saw for purposes not intended. For example:

do not use chain saw for cutting plastic, masonry or non-wood building

materials. Use of the chain saw for operations different than intended could result in

a hazardous situation.

Purpose for using of the electric hedge trimmer

The device is intended for infrequent use by homeowners and for such general

applications as clearing, pruning, etc. Any other usage, which do not declared in this