Makita BML185 Gebrauchsanweisung - Seite 5

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Elektrowerkzeug Makita BML185 herunter. Makita BML185 13 Seiten. Rechargeable flashlight
Auch für Makita BML185: Aufschlüsselung der Teile (2 seiten), Aufschlüsselung der Teile (2 seiten), Gebrauchsanweisung (8 seiten)

Seite drucken

FUNCTIONAL DESCRIPTION

Charging

Charge the battery cartridge with the Makita charger

before use.

Installing or removing battery cartridge

(Fig. 1)

• Always switch off the tool before insertion or removal of

the battery cartridge.

• To remove the battery cartridge, withdraw it from the

tool while sliding the button on the front of the cartridge.

• To insert the battery cartridge, align the tongue on the

battery cartridge with the groove in the housing and slip

it into place. Always insert it all the way until it locks in

place with a little click. If you can see the red part on

the upper side of the button, it is not locked completely.

Insert it fully until the red part cannot be seen. If not, it

may accidentally fall out of the tool, causing injury to

you or someone around you.

• Do not use force when inserting the battery cartridge. If

the cartridge does not slide in easily, it is not being

inserted correctly.

Lighting up the bulb (Fig. 2)

CAUTION:

• Do not look in the light or see the source of light

directly.

• This tool has function that bulb light goes out at low

voltage. At this time, recharge the battery cartridge.

Push the switch to light up the bulb. To turn off, push the

switch again.

The following tables indicate the operating time on a sin-

gle charge.

Model

Voltage

BML145

14.4V

BML185

18V

Head angle (Fig. 2)

The head angle can be adjusted in four stages. Adjust as

desired.

ASSEMBLY

Replacing bulb (Fig. 3 & 4)

CAUTION:

The bulb is very hot immediately after operation. Wait until

the bulb cools off before attempting to replace it.

First, turn the ring counterclockwise and remove the

reflector. Then replace the bulb.

Shoulder strap (Fig. 5)

Install the strap on the tool.

Battery

Operating

cartridge

time

Approx.

BL1430

220 min

Approx.

BL1830

260 min

MAINTENANCE

To maintain product safety and reliability, repairs, mainte-

nance or adjustment should be carried out by a Makita

Authorized Service Center.

ACCESSORIES

CAUTION:

These accessories or attachments are recommended for

use with your Makita tool specified in this manual. The use

of any other accessories or attachments might present a

risk of injury to persons. The accessories or attachments

should be used only in the proper and intended manner.

• Bulb set (2 pcs.)

• Shoulder strap

• Various type of Makita genuine batteries and chargers