Gardco 121L Einbauanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Einbauanleitung für Lantern Gardco 121L herunter. Gardco 121L 4 Seiten.

Seite drucken
Signify Classified - Internal
INSTALLATION INSTRUCTIONS
STANDARD MOUNT – 121 LED SCONCE
DRIVER MOUNT
BRACKET
HOUSING
DOOR/HEATSINK
1. APPLY A BEAD OF SELANT ON WALL AROUND
SPLICE BOX OPENING AND AROUND HOLES USED
FOR OPTIONAL MOUNTING BOLTS OR SCREWS
WHEN USING A 4" OCTAGONAL BOX (SHOWN), FILL
GAP BETWEEN WALL OPENING AND SPLICE BOX
WITH SEALANT.
APPLY SEALANT TO THE TOP INSIDE CORNERS OF
THE MOUNTING BRACKET.
2. PLACE MOUNTING BRACKET OVER SPLICE BOX AND
SECURE WITH J-BOX SCREWS.
3. LINE TO SUPPLY LINE, COMMON TO COMMON AND
GROUND TO GROUND.
4. PLACE SPLICES AND EXCESS WIRE IN SPLICE BOX.
CAREFULLY ENGAGE THE HANGER BRACKET TO THE
MOUNTING PLATE BEING CAREFUL NOT TO PINCH WIRES.
SLIDE DOWN FIXTURE TO REST AGAINST WALL.
TIGHTEN LOCKING SCREWS.
© 2018 Signify Holding. All rights reserved. This document contains information relating to the product portfolio of Signify which information may be subject to change. No representation or
warranty as to the accuracy or completeness of the information included herein is given and any liability for any action in reliance thereon is disclaimed. The information presented in this
document is not intended as any commercial offer and does not form part of any quotation or contract. All trademarks are owned by Signify Holding or their respective owners.
443561087360 A
Page 2 of 4
BACK PLATE
DRIVER
LIGHT
ENGINES
SPLICES
(BY OTHERS)
HANGER
BRACKET
SEALANT
LOCKING
SCREW
5/16 MOUNTING
BOLT (1 OF 4)
BY OTHERS
SPLICE BOX
(BY OTHERS)
3 1/8"
MOUNTING PATTERN FOR
OPTIONAL BOLTS
4" OCTAGONAL BOX (BY OTHERS)
SHOWN FOR REFERENCE
3 1/8"