E-TINT CTRL MG1 Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Smart Glasses E-TINT CTRL MG1 herunter. E-TINT CTRL MG1 2 Seiten.

Seite drucken

CLEANING & CARE: Clean with warm water, mild detergent, and a soft cloth. For stubborn residues clean with a household glass cleaner. Do

not use cleaners which contain moisturizers, abrasives, strong acids, or caustics. Do not immerse the spectacle in liquids. Do not leave or

store goggle in excessive heat when not in use.

COMFORT & FIT: Tighten or loosen the goggle head strap by moving the strap-adjusting slide right or left.

1. Switch the goggle into the "off" or clear state.

2. Pull up the Velcro flap covering the plug on the back of the electronics module (Diagram 3).

3. Carefully lift the flexible connection ribbon ("flex") to disconnect the plug (Diagram 4).

4. Push the flex through the slot in the frame (Diagram 5).

5. With both hands, gently pull the nose bridge and brow section of the frame outward, releasing the lens from the frame's pins (Diagram 6).

6. Choose a new lens (either an e-Tint

7. Secure the lens in the frame by applying pressure around the frame edges and snapping the lens onto the pins of the frame.

8. Align and connect the flex to the plug on the frame. Single click the button to confirm the electronics are properly connected.

9. Close the Velcro flap to secure area from dirt and water (this should be done with any lens whether electronics are connected or not.)

For warranty/repair service, or to return any new, unopened product for a full refund or exchange (within 30 days of purchase),

please contact Customer Support at [email protected] or visit www.e-tintproducts.com for a Return Merchandise Autho-

rization (RMA) number and specific shipping instructions. Products returned for a full refund must be in new condition and in original

packaging (including all accessories), and returned to us within 30 calendar days of the issuance of the RMA. A 20% restocking fee

may be charged for any accessories or components missing from the returned product. A purchase receipt MUST be provided with

the return of any product. Products returned without an RMA will not be eligible for a refund or exchange. The shipping and duty

charges for returning a product are the customer's responsibility.

The following information is required for all returns:

• LOT NO.

Found on the UPC label (on the retail box)

• SKU NO.

Found on the UPC label (on the retail box)

• ORIGINAL PURCHASE RECEIPT

• FIRST & LAST NAME

• TELEPHONE NUMBER

• EMAIL & SHIPPING ADDRESS

All e-Tint

products are warranted to the original purchaser for six (6) months from the date of purchase against manufacturing

defects in materials and workmanship. Upon receiving returned product(s) that e-Tint determines to be defective, we will repair

or replace the product at our option. Please contact Customer Support at [email protected] for warranty service.

This warranty does not affect the legal rights of customers under applicable state or national laws governing the sales of

consumer goods.

EXCLUSIONS

The Return Policy and Limited Warranty does not apply to: (a) normal wear and tear, including scratched lenses; (b) water

damage; (c) damage due to neglect, abuse, misuse, or mishandling; (d) damage caused by improper storage or improper

maintenance; (e) damage caused by use of chemicals or improper cleaning; (f) damage due to accidents or acts of nature; and

(g) battery damage from improper use; (h) damage resulting from alterations, changes, or repairs not authorized in writing by

e-Tint.

Online Auction Purchases: Products purchased through online auctions (other than our primary websites or Authorized

Dealers) are not eligible for warranty coverage. Online auction confirmations are not accepted for warranty verification.

EXCEPT AS SET FORTH IN THE LIMITED WARRANTY, ALL E-TINT

EXTENT PERMITTED BY APPLICABLE LAW, ALL OTHER WARRANTIES OF ANY KIND, WHETHER EXPRESS OR IMPLIED, ARE

EXPRESSLY DISCLAIMED.

This product is subject to one or more U.S. or foreign patents listed at: e-tintproducts.com/intellectual property

e-TINT, LLC | WWW.E-TINTPRODUCTS.COM | (877) 451-5937

lens removal / installation

visit www.e-tintproducts.com for instructional videos

lens or clear lens). If installing an e-Tint® lens, first thread the flex gently through the slot in the frame.

RETURN POLICY

LIMITED WARRANTY

PRODUCTS ARE PROVIDED ON AN "AS IS" BASIS. TO THE

MADE IN THE U.S.A.