KitchenAid KFED500EWH03 Installationsanleitung Handbuch - Seite 8
Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Ranges KitchenAid KFED500EWH03 herunter. KitchenAid KFED500EWH03 13 Seiten. 30" (76.2 cm) freestanding electric range with double ovens
Seite drucken
Style 2: Direct wire strain relief
Use Phillips screwdriver to remove screws and slide cord/
■
conduit plate down and out.
Position cord/conduit plate as shown in the following
■
illustration.
Replace cord/conduit plate and insert screws.
■
Assemble a UL Listed conduit connector in the opening.
■
A. Removable retaining nut
B. Strain relief
8
5. Replace back panel and screws on rear of range.
6. Complete installation following instructions for your type of
Electrical Connection Options
4-wire receptacle
(NEMA type 14-50R)
4-wire direct
3-wire receptacle
(NEMA type 10-50R)
3-wire direct
A
B
Feed the flexible conduit through the strain relief,
■
allowing enough slack to easily attach wiring to the
terminal block.
Tighten strain relief screw against the flexible conduit.
■
electrical connection:
4-wire (recommended)
3-wire (if 4-wire is not available)
If your home has:
And you will be
connecting to:
A UL Listed,
250-volt
minimum,
40-amp, range
power supply
cord
A fused
disconnect or
circuit breaker
box
5"
(12.7 cm)
A UL Listed,
250-volt
minimum,
40-amp, range
power supply
cord
A fused
disconnect or
1"
circuit breaker
(2.5 cm)
box
3"
(7.6 cm)
Go to Section:
4-wire connection:
Power Supply Cord
4-wire Connection:
Direct Wire
3-wire connection:
Power Supply Cord
3-wire connection:
Direct Wire