Avanti BCA5448 Gebrauchsanweisung - Seite 9

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Küchengeräte Avanti BCA5448 herunter. Avanti BCA5448 20 Seiten. Beverage cooler

It is recommended you install the Beverage Cooler in a place where the ambient temperature is

between 72-78 degrees Fahrenheit. If the ambient temperature is above or below recommended

temperatures, the performance of the unit may be affected. For example, placing your unit in extreme

cold or hot conditions may cause interior temperatures to fluctuate.

 ON/OFF POWER

To turn ON or OFF the appliance, press the ON/OFF button

The LED readout will show the original temperature set previously (the preset temperature at the

factory is 43ºF(6ºC).

You can select temperature display setting from Fahrenheit to Celsius degree by pushing the ºF/ºC

button. Fahrenheit or Celsius degrees indicators will appear in blue color in the temperature

display window.



You can press UP

. The degrees indicators will appear in the display window.



Then press the UP

The LED indicator on the display will flash



The temperature that you desire to set will increase 1ºF or 1ºC if you push the UP

once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the DOWN

once.



The temperature range is 39 ~ 45ºF.

NOTE:



If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting

the unit. If you attempt to restart before this time delay, the Beverage Cooler will not start.



When you use the Beverage Cooler for the first time or restart the Beverage Cooler after having

been shut off for a long time, there could be a few degrees variance between the temperature you

select and the one indicated on the LED readout. This is normal and it is due to the length of the

activation time. Once the Beverage Cooler is running for a few hours everything will be back to

normal.

OPERATING YOUR BEVERAGE COOLER

TEMPERATURE CONTROL PANEL

or DOWN

buttons to get the desired temperature.

or DOWN

buttons to get the desired temperature.

button