Garden Gear D5942 Gebrauchsanweisung - Seite 7
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Kettensäge Garden Gear D5942 herunter. Garden Gear D5942 17 Seiten. Pole chainsaw
Seite drucken
Assembly
Chain and guide bar
Please note: The cutting edges of the chain are sharp. Wear protective
gloves when handling.
1.
Sprocket
2.
Adjusting hole
3.
Sprocket cover
4.
Guide bar screw
5.
Adjusting screw
6.
Adjusting plate
7.
Adjusting block
Lay the chain head on a flat surface and, using the hex key supplied, remove
the guide bar screw, washer and spring washer, turning anti-clockwise. Lift the
sprocket cover off.
Turn the adjusting screw anti-clockwise until the adjusting block is in the middle
of the adjusting plate. This will allow you to position the adjusting hole on the
guide bar, onto the adjusting block.
Position the guide bar onto the adjusting plate with the large slot onto the
protrusions. Position the rear of the guide bar between the adjusting plate and
the sprocket. Make sure that you insert the adjusting block into the adjusting
hold on the guide bar.
7
1
2
6
5
3
7
4