Avantree AH5 Benutzerhandbuch

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kopfhörer Avantree AH5 herunter. Avantree AH5 4 Seiten. Wireless headband headphone with microphone

Seite drucken
Avantree AH5 Benutzerhandbuch

1. Product Description

Avantree AH5 is a wireless headband headphone with microphone under Avantree family. It features
with PC wirless communication(MSN, SKYPE) and clear mobile communication in noisy environment
(truck,airport,construction site etc). It is your ideal choice of the chatting Bluetooth headset.

2. Product Overview

Contents In Box:
Avantree Headphone
1.
USB charging cable
2.
User manual
3.
3. Charging
1) First time, please charge the device for at least 2.5 hours to make sure the headset is fully
charged and the battery reach its full capacity.
2) Afterwards, each charge cycle may take up to 2.5 hours.
3) LED will indicate red in charging and off when charging is complete.
4) If you have not use the item for a few months, LED might not turn red when first charging. It
might take 15-35 minutes before the LED turn red.
5) We suggest to fully charge the AH5 for at least one time in two months.
Notice:
When battery power is low, the indicator shows red shimmering light, then you can hear "Do—"
voice, after this, the headset automatically shut off.
4. Turn On / Off
Turn On: From OFF, press and hold the "MFB" around 3 seconds until you hear a "Doo_" tones, the
indicator LED flashes Blue quickly.
Turn Off: From ON, press and hold the "MFB" around 3 seconds until you hear a "Doo_" tones, and
the indicator LED flashes red quickly.
5. Working with mobile phone (Tutorial online)
It is important to pair the headset with your Bluetooth Mobile phone for the first time use.
5.1 Pairing procedure:
A. Ensure the headset is off
B. Press and hold the MFB button for around 5 seconds until LED blink blue and red alternatively.
C. Search the device from your phone.
D. Once found "Avantree AH5'', follow the steps and enter pin code 0000 to pair. Some phones
don't need this pin code.
E. Connect the headset to the device.
F. Headset is ready for use now.
Once paired and connected, the headset will be automatically connected to the device whenever you
turn the headset on again, provided the device is in the range.