Avantree AS70 Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Empfänger Avantree AS70 herunter. Avantree AS70 4 Seiten. Wireless audio receiver for wired headphones

Seite drucken

Broadcast Receiving Mode

The Broadcast function allows the user to connect to up to 100 receivers (such as AS70) to one single transmitter

(such as DG60) simultaneously. This function is perfect for situations where you need audio being played

through multiple speakers wirelessly. To use it:

1. Set the Broadcast transmitter into broadcast pairing mode (please refer to its user manual.)

2. Set AS70 into broadcast mode-

a) Turn on, press &hold MODE button for 2 seconds, AS70 will switch to broadcast receiver mode with the

LED indicator slowly flashing WHITE.

b) Tap the MODE button again, the AS70 will enter broadcast pairing mode (LED flashing speeds up.)

3. Keep the two devices close to each other. Once connected, the LED indicator on AS70 will turn SOLID WHITE.

Clear Paired History

One may need to clear paired history when experience short range, audio cuts, cannot reconnect or pair.

Turn on the AS70. Press and hold both button "+" and "-" for 5 seconds, LED lights up

looks like PINK), now all paired history of AS70 is cleared and AS70 will enter pairing mode automatically.

Charging

When the LED indicator starts flashing RED, you should charge the device.

Connect the AS70 to a power source using the micro-USB cable we provided. You may either use a wall plug

with 5V/500mA-1A (please utilize an USB-wall plug adapter such as a mobile phone charger) or a PCUSB port.

The LED indicator will turn

around 2 hours to fully charge.

RED

while charging and turn

BLUE

when the charging is complete. It normally takes

BLUE

and

RED

for 2 seconds (