Avantree Saturn Pro Benutzerhandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Empfänger Avantree Saturn Pro herunter. Avantree Saturn Pro 10 Seiten. Low latency bluetooth receiver and transmitter 2-in-1
Auch für Avantree Saturn Pro: Benutzerhandbuch (3 seiten)
Seite drucken
- 1. Product Description
- 2. Product Overview
- 3. What’s in the Box
- 4. Charging
- 5. Transmitter - Turn on / off
- 6. Transmitter - Pairing with a Bluetooth Device
- 7. Pairing Procedure
- 8. LED Indications
- 9. Receiver - Turn on / off
- 10. Receiver - Pairing with a Bluetooth Device
- 11. Obtaining the Maximum Stable Range
- 12. Use Two as a Pair
- 13. Reconnect
- 14. Restore Factory Default Setting
- 15. Product Specification
- 16. Safety Information
Bluetooth devices. The instructions here are just for general guidance - please check your phone or tablet's documentation in case
of difficulties).
5) iPhone will auto scan the available Bluetooth devices. Click on "Avantree Saturn Pro" from the list of devices shown and according
to the indication offered, tap on "Yes" or "Confirm" .
6) After pairing successfully, Saturn Pro's LED indicator will blinks blue slowly.
Notes:
1)
Pairing mode will last 2 minutes. The receiver will enter standby mode if no devices can be connected within 2 minutes.
2)
If pairing fails, please power off Saturn Pro and re-pair according to above procedures.
3) Saturn Pro can remember 8 paired devices. When the number of paired devices exceeds 8, the oldest one will be removed from
the list.
4) Every time Saturn Pro powers on, it will connect to the last connected device automatically. If you want to pair it to another
devices, please turn off the current paired device's Bluetooth mode and then try to pair Saturn Pro to the new device, according to
the above pairing procedure.
7.2 LED Indications:
LED indicator
LED blinks BLUE then RED continuously
LED flashes BLUE once every second
LED flashes BLUE once every 5 seconds
LED flashes BLUE twice every 5 seconds
LED flashes BLUE three times every 5 seconds
LED flashes BLUE four times every 5 seconds
LED blinks RED
7.3 Obtaining the maximum stable range.
Please ensure there are no obstacles (walls, corners, partitions etc.,) between the receiving and transmitting devices. Also, when
wearing devices, keep them to the same side of your body (see diagram below).
8. Use Two as a Pair
2
Saturn Pros as a pair, with one a receiver and one as receiver, allowing you to use the audio output device of your choice in
conjunction with the AptX codec for lower wireless latency.
Status of Saturn Pro under RX mode
Pairing mode. Lasts for 2 minutes.
Standby mode. Not connected to any other device.
Device connected with SBC
Device connected with aptX
Device connected with aptX low latency
Device connected with AAC decode
Low battery power. Please recharge.