AVANTREK Macrover 100 Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör für Fahrräder AVANTREK Macrover 100 herunter. AVANTREK Macrover 100 7 Seiten. Fat-tire ebike lcd display
Seite drucken
The default power ranges from level 1 to level 5. If you want to switch off assistance then us DOWN to reach level 0.
Error Codes Information
Getting error codes on your Avantrek Bike is not something you want to see. Sometimes an error code could mean a loose wire, or other times a sensor
could be damaged. Use the error code chart below to find out what the error on your LCD display means.
Below are the most common errors on Avantrek Bikes:
Error code
33
Current Sensor Fault
34
35
Motor Phase Line Fault
36
Motor Hall Sensor Fault
37
30
Communication Fault
Error
The controller's current sensor has become disconnected or damaged. Contact tech support.
Handle Fault
Throttle may be damaged. Check the throttle cable for damage.
At least one of the motor's phase wire has been disconnected or damaged.
At least one of the motor's hall sensor wires has been disconnected or damaged. Disconnect
and reconnect the motor cable.
Brake Fault
Unplug brake pads, and to check each brake, restart the bike. If the error remains, try a new
controller after unplugging the brakes.
Poor connection between the controller and the display. Check all cable connection. Check
for corrosion damage.
Notes
5