Jands FP12 Betriebshandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Dimmer Jands FP12 herunter. Jands FP12 20 Seiten. 12 channel, 2.4kva per channel (10a/240v) dimmer rack

Seite drucken

Equipment Description

2.0 Equipment Description

2.1

Front panel layout

Refer to Fig 2.1 (below) for a description of the front panel controls.

1. Channel output sockets (rear panel): The twelve output sockets are each rated at

10 amps.

2. Channel circuit breakers: If a breaker trips during use ensure the fault has been

cleared before resetting.

3. Bank select switches: These switches select the DMX start bank and the Test

functions.

4. DMX IN LED: A red LED indicates the presence of DMX signals. If there is no

DMX signal, the LED will flash at a rate of approximately 2 seconds on - 2 seconds

off.

5. STATUS LED: A red LED flashes in the presence of a fault. In normal operation

this LED should be off.

6. PHASE LEDs: Three blue LEDs (one for each phase) indicate that the three phase

mains supply is available.

Revision 0.1 – 3 June 1999

Figure 2.1 FP12 front panel layout

FP12 DIMMER

2-1

USER MANUAL