Jandy TruGuard Installations- und Betriebshandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Installations- und Betriebshandbuch für Water Filtration Systems Jandy TruGuard herunter. Jandy TruGuard 20 Seiten.

Seite drucken

Page 4

Section 2.

2.1

Product Overview

This manual provides instructions for installing and replacing the Jandy

TruGuard in swimming pools from a minumum of 19,000L (5,000 g) up

to a maximum of 170,000L (45,000 g).

TruGuard must be used in conjunction with a chlorine delivery device or

0.6 ppm of a PMRA registered chlorine pool product; it is not a standalone

purifier. A minimum chlorine level of 0.6 ppm must be maintained in the

swimming pool water for optimal swimmer health. The recipe included in

this manual will help ensure good water quality for your pool.

This product is not compatible with biguanide products or copper based

algaecide and should not be used in any manner inconsistent with the

product manuals and labeling.

2.2

Product Contents

1 - TruGuard Housing

2 - TruGuard Cartridge

3 - Winterizing and Pressurizing Cap

Section 3.

Before installing a new TruGuard cartridge, clean debris and algae out of

the pool and pool equipment. Do not install the new cartridge until the pool

water is clean and chemically balanced. Refer to the Owner's Manual for

water balance instructions. The TruGuard housing fits 2" or 2 1/2" pipe sizes.

ENGLISH

General Description

NOTICE

Installation Requirements

Jandy

TruGuard

| Installation & Operation Manual

™

4 - Owner's Manual

5 - Installation Manual