Avaris 220322ODY-19 Benutzerhandbuch - Seite 15
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Fahrrad Avaris 220322ODY-19 herunter. Avaris 220322ODY-19 17 Seiten.
Seite druckenyour new electric bicycle, if you feel that a different tyre might better suit your riding needs, you can discuss the
alternative options with a professional bicycle tyre dealer.
Tyre size, pressure rating and specific recommended use, should be marked on the sidewall of the tyre (see example
pic on next page).
The information which is most important to you is the maximum tyre pressure.
WARNING: Never inflate a tyre beyond the maximum pressure marked on the tyre's sidewall. Exceeding the
recommended maximum pressure may blow the tyre off the rim, which could cause damage to the bike and injury to
the rider and any bystanders.
The safest way to inflate a bicycle tyre to the correct pressure is with a bicycle pump that has a built-in pressure
gauge.
A suitable pressure for the tyre on this bicycle, is anywhere between 35 and 40psi.
The tyre size used on this bicycle is 29"x2.20".
The innertubes used within these tyres are 29".
WARNING: There is a safety risk in using petrol station forecourt air hoses, or other high pressure air compressors.
They are not made for bicycle tyres. They move a large volume of air very rapidly and will raise the pressure in your
tyre very rapidly, which could cause the innertube/tyre to explode.
SECTION SIX:
Some service and maintenance procedures can and should be performed by the owner. They require no special tools
or knowledge beyond what is presented in this manual.
The following are examples of the type of services you should perform yourself. All other service, maintenance and
repair should be performed in a properly equipped facility by a qualified electric bicycle mechanic, using the correct
tools and procedures specified by the manufacturer.
1. Break-in Period: Your bike will last longer and work better if you break it in before riding it hard. Control
cables and wheel spokes may stretch or "seat" when a new bike is first used, and therefore may require re-
adjustment. Actioning a 'Mechanical Safety Check' (Section 1) will help you identify components that may
need re-adjusting. Even if everything seems fine to you, it's still best practice to take your electric bicycle to a
professional for the initial first check-up. Another way to judge when it's time for the first check-up, is to
bring the bicycle in after three to five hours of hard off-road use, or about 10 to 15 hours of on-road or more
casual off-road use. But if you think something is wrong with the bicycle before then, take it to a local
professional before riding it again.
2. Before every ride: Carry out a Mechanical Safety Check (see Section 1).
3. After every long or hard ride: if the bike has been exposed to water or grit; or at least every 100 miles: Clean
the bike and lightly oil the chain. DO NOT use high pressure water streams to clean your electrical bicycle.
Wipe off excess oil. Re-lubricate relevant parts according to your riding climate (wet, dry etc)