Lexmark 650dtn - T B/W Laser Printer Handbuch zur Fehlersuche - Seite 3
Blättern Sie online oder laden Sie pdf Handbuch zur Fehlersuche für Drucker Lexmark 650dtn - T B/W Laser Printer herunter. Lexmark 650dtn - T B/W Laser Printer 10 Seiten. Envelope feeder installation sheet
Auch für Lexmark 650dtn - T B/W Laser Printer: Einrichtung und Installation (2 seiten), Installationsblatt (1 seiten)
Seite drucken
Solving option problems
Settings chosen from the software program or application can
change or override settings chosen from the printer control panel.
If an option is not functioning, then make sure it is selected in the
software as well as the printer control panel.
Option does not operate correctly or
quits after it is installed
These are possible solutions. Try one or more of the following:
R
ESET THE PRINTER
Turn the printer off, wait about 10 seconds, and then turn the
printer on.
C
HECK TO SEE IF THE OPTION IS CONNECTED TO THE
PRINTER
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Check the connection between the option and the printer.
4
Connect the power cord to a properly grounded wall outlet.
M
AKE SURE THE OPTION IS INSTALLED CORRECTLY
Print a menu settings page and check to see if the option is
listed in the Installed Options list. If the option is not listed, then
reinstall it. For more information, see the hardware setup
documentation that came with the option.
M
AKE SURE THE OPTION IS SELECTED
From the computer you are printing from, select the option. For
more information, see the User's Guide.
Paper trays
These are possible solutions. Try one or more of the following:
M
AKE SURE THE PAPER IS LOADED CORRECTLY
1
Open the paper tray.
2
Check for paper jams or misfeeds.
3
Make sure paper guides are aligned against the edges of
the paper.
4
Make sure the paper tray closes properly.
R
ESET THE PRINTER
Turn the printer off, wait about 10 seconds, and then turn the
printer on.
M
AKE SURE THE PAPER TRAY IS INSTALLED CORRECTLY
If the paper tray is listed on the menu settings page, but paper
jams when it enters or exits the tray, then it may not be properly
installed. Reinstall the paper tray. For more information, see the
hardware setup documentation that came with the paper tray,
or go to www.lexmark.com/publications to view the paper
tray instruction sheet.
2000-sheet tray
These are possible solutions. Try one or more of the following:
T
HE ELEVATOR TRAY IS NOT WORKING PROPERLY
•
Make sure the printer is properly connected to the
2000-sheet tray.
•
Make sure the printer is turned on.
T
HE PAPER FEED ROLLERS DO NOT TURN TO ADVANCE
PAPER
•
Make sure the printer is properly connected to the
2000-sheet tray.
•
Make sure the printer is turned on.
Envelope feeder
These are possible solutions. Try one or more of the following:
R
ESET THE PRINTER
Turn the printer off, wait about 10 seconds, and then turn the
printer on.
3
M
AKE SURE THE ENVELOPES ARE LOADED CORRECTLY
1
Adjust the envelope support for the length of envelope you
are using.
2
For more information, see the User's Guide.
C
HECK THE PAPER TYPE AND PAPER SIZE SETTINGS
Make sure the paper type and paper size settings match the
envelopes you are using:
1
From the printer control panel, check the settings for the
envelope feeder from the Paper menu.
2
Before sending the job to print, specify the correct settings
from the computer:
•
For Windows users, specify the settings from Print
Properties.
•
For Macintosh users, specify the settings from the Print
dialog.
M
AKE SURE THE ENVELOPE FEEDER IS INSTALLED
CORRECTLY
If the envelope feeder is listed on the menu settings page, but
an envelope jams when it enters or exits the feeder, then it may
not be properly installed. Reinstall the envelope feeder. For
more information, see the hardware setup documentation that
came with the envelope feeder, or go to
www.lexmark.com/publications to view the envelope feeder
instruction sheet.
Duplex unit
If the duplex unit is listed on the menu settings page, but paper
jams when it enters or exits the duplex unit, then it may not be
properly installed. Reinstall the duplex unit. For more information,
see the hardware setup documentation that came with the duplex
unit, or go to www.lexmark.com/publications to view the
duplex unit instruction sheet.