Lexmark 810 Series Schnellstart-Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Drucker Lexmark 810 Series herunter. Lexmark 810 Series 2 Seiten. Color jetprinter;
Auch für Lexmark 810 Series: Handbuch installieren (2 seiten), Installationshandbuch (20 seiten)

Seite drucken
Make sure your computer is on.
11
Make sure your computer is on.
Insert the CD.
14
Insert the CD.
Follow the instructions on your screen.
Follow the instructions on your screen.
If you inserted the CD and the install screen did not appear (Windows):
1 Click Cancel on any Add New Hardware screens.
2 Eject and reinsert the printer software CD.
If the printer software install screen does not appear:
From your desktop, double-click My Computer (In Windows XP, click Start à My
a
Computer).
b
Double-click the CD-ROM drive icon. If necessary, double-click setup.exe.
c
When the printer software install screen appears, click Install.
d
Follow the instructions on the screen to complete the installation.
If you inserted the CD and the install screen did not appear (Mac):
1 From your desktop, double-click the Lexmark 810 Series Installer icon.
2 Double-click Install and follow the instructions on the screen.
If you inserted the CD and the install screen did not appear (Windows):
1 Click Cancel on any Add New Hardware screens.
2 Eject and reinsert the printer software CD.
If the printer software install screen does not appear:
From your desktop, double-click My Computer (In Windows XP, click Start à My
a
Computer).
b
Double-click the CD-ROM drive icon. If necessary, double-click setup.exe.
c
When the printer software install screen appears, click Install.
d
Follow the instructions on the screen to complete the installation.
If you inserted the CD and the install screen did not appear (Mac):
1 From your desktop, double-click the Lexmark 810 Series Installer icon.
2 Double-click Install and follow the instructions on the screen.
P/N 21G0077
E.C. 21G005
© 2004 Lexmark International, Inc. All rights reserved.
Attach the USB cable to your printer and computer.
12
Attach the USB cable to your printer and computer.
Setup Troubleshooting
Symptom:
Diagnosis:
The Power light is not lit
Is the power cord pushed all the way into the printer?
Is the printer connected to a working electrical outlet?
Software will not install
Is your operating system compatible with the printer?
Alignment page or test
Is the printer on?
page will not print
Do you see an error message on the monitor or
flashing lights on the printer?
Is your printer connected to your computer through
another device, such as a USB hub or switch box?
Did you remove the sticker and tape from the bottom of
each print cartridge?
Are the print cartridges installed properly?
Is the paper loaded correctly?
Setup Troubleshooting
Symptom:
Diagnosis:
The Power light is not lit
Is the power cord pushed all the way into the printer?
Is the printer connected to a working electrical outlet?
Software will not install
Is your operating system compatible with the printer?
Alignment page or test
Is the printer on?
page will not print
Do you see an error message on the monitor or
flashing lights on the printer?
Is your printer connected to your computer through
another device, such as a USB hub or switch box?
Did you remove the sticker and tape from the bottom of
each print cartridge?
Are the print cartridges installed properly?
Is the paper loaded correctly?
Important!
13
Click Cancel on the Add New Hardware screen.
Note: Add New Hardware screens appear only for Windows users. For Macintosh, continue with step 14.
Note: Add New Hardware screens appear only for Windows users. For Macintosh, continue with step 14
Solution:
Disconnect the power cord from the wall outlet, and
then from the printer. Reconnect the power cord by
pushing it all the way into the connector on the
printer, and then into the wall outlet.
Connect the printer to an electrical outlet that other
electrical devices have been using.
The printer supports these operating systems:
• Windows 98
• Windows Me
• Windows 2000
• Windows XP
• Mac OS X version 10.1.5
• Mac OS X version 10.2.3 and later
Press the Power button. If the Power light does not
come on, see the "The Power light is not lit"
symptom at the beginning of this table.
See "Error messages troubleshooting" in your
User's Guide.
Disconnect the USB cable from any other devices
and directly connect it between the printer and your
computer. For help, see step 12.
Remove the print cartridges, check for the sticker
and tape and then reinsert them. For help, see
step 7 and step 8.
See step 10.
Solution:
Disconnect the power cord from the wall outlet, and
then from the printer. Reconnect the power cord by
pushing it all the way into the connector on the
printer, and then into the wall outlet.
Connect the printer to an electrical outlet that other
electrical devices have been using.
The printer supports these operating systems:
• Windows 98
• Windows Me
• Windows 2000
• Windows XP
• Mac OS X version 10.1.5
• Mac OS X version 10.2.3 and later
Press the Power button. If the Power light does not
come on, see the "The Power light is not lit"
symptom at the beginning of this table.
See "Error messages troubleshooting" in your
User's Guide.
Disconnect the USB cable from any other devices
and directly connect it between the printer and your
computer. For help, see step 12.
Remove the print cartridges, check for the sticker
and tape and then reinsert them. For help, see
step 7 and step 8.
See step 10.
Important!
Click Cancel on the Add New Hardware screen.
Have a question?
• Refer to the User's Guide.
For Windows:
Click Start à Programs or All Programs à Lexmark 810 Series à
User's Guide.
For Mac OS X:
1
From your desktop, double-click the Lexmark 810 Series folder
alias.
2
Double-click the Lexmark 810 Series.help alias.
• Refer to the Lexmark Solution Center software.
Click Start à Programs or All Programs à Lexmark 810
1
Series à Lexmark Solution Center.
2
Click the Troubleshooting tab on the left side of the screen.
• Visit our Web site:
http://support.lexmark.com/
Have a question?
• Refer to the User's Guide.
For Windows:
Click Start à Programs or All Programs à Lexmark 810 Series à
User's Guide.
For Mac OS X:
1
From your desktop, double-click the Lexmark 810 Series folder
alias.
2
Double-click the Lexmark 810 Series.help alias.
• Refer to the Lexmark Solution Center software.
Click Start à Programs or All Programs à Lexmark 810
1
Series à Lexmark Solution Center.
2
Click the Troubleshooting tab on the left side of the screen.
• Visit our Web site:
http://support.lexmark.com/
Need more ink?
The following cartridges work with your printer.
Need more ink?
The following cartridges work with your printer.
• 31
• 32
• 33
• 34
• 35