Lexmark C 752 Handbuch zur Beseitigung von Staus
Blättern Sie online oder laden Sie pdf Handbuch zur Beseitigung von Staus für Drucker Lexmark C 752 herunter. Lexmark C 752 5 Seiten. Optional envelope drawer
Auch für Lexmark C 752: Benutzerhandbuch (4 seiten), Kurzreferenz (2 seiten), Handbuch zur Beseitigung von Staus (2 seiten), Kurzreferenz (3 seiten), Installationshandbuch (16 seiten)
Seite drucken
Lexmark™ C752
Clearing Jams
Guide
Avoiding jams
The following hints can help you avoid paper jams:
•
Use only recommended paper. Refer to the
Card Stock & Label Guide available on the
Lexmark Web site at www.lexmark.com/
publications for more information about which
paper provides optimum results for your printing
environment.
•
Do not remove paper trays while a job is
printing. Wait for a Load Tray <x> or Ready
message before you remove the tray.
•
If you need detailed information before
purchasing large quantities of customized
paper, refer to the Card Stock & Label Guide.
•
Do not load wrinkled, creased, or damp paper.
•
Never mix media types within a tray.
•
Flex, fan, and straighten paper before you load
it.
•
Do not overload the trays or the multipurpose
feeder. Make sure the stack height does not
exceed the maximum height indicated.
•
Push all trays firmly into the printer after loading
them.
•
Make sure the guides in the trays are properly
positioned for the size paper you have loaded.
•
Do not send jobs to staple, hole punch, or offset
for transparencies, labels, or card stock.
•
We recommend that transparencies, labels,
card stock, and envelopes not be sent to the
optional mailbox or optional finisher. These
specialty media types should be sent to the
standard bin.
•
If a jam should occur, clear the entire paper
path.
Clearing jams
Understanding jam messages
Message
What to do
Clear Area B and Area T1.
200 Paper Jam
Clear Area D, Area K, and Area L.
201 Paper Jam
Clear Area K and Area L.
202 Paper Jam
Clear Area E and Area J.
230 Paper Jam
Clear Area B, Area C, and Area
24<x> Paper
T<x>.
Jam
Clear Area A and Area D.
250 Paper Jam
Clear Area M.
27<x> Paper
Jam
Area A
1
Release the levers on each side of the
multipurpose feeder to lay it flat.
2
Press the pick assembly release lever, and
remove all media and jams.
3
Return the feeder to its working position, and
reload your paper.
Area B
1
Open the left access door until it clicks into
place.
2
Remove all visible paper. Remove any torn
paper from the printer.
3
Close the door.
4
Open Tray 1, and make sure the entire paper
stack is pushed all the way down into the tray.