Jandy Infinite WaterColors IWCP50W100 Installations- und Betriebshandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Installations- und Betriebshandbuch für Controller Jandy Infinite WaterColors IWCP50W100 herunter. Jandy Infinite WaterColors IWCP50W100 12 Seiten. Led lighting
Auch für Jandy Infinite WaterColors IWCP50W100: Installations- und Betriebshandbuch (12 seiten), Handbuch (2 seiten)
Seite drucken
Transformer
BLK
ENGLISH
WHT
GND
Control Board
LED2:
Turns on
RESET
red when
powered.
WHT
BLK
GND
Terminal Bus
Bonding Lug
120 VAC
2.75 A
Figure 2.
Jandy Infinite WaterColors Wiring Diagram
Section 6. iAquaLink
Features
Download the iAqualink app and/or upgrade to the latest
version prior to light and zone set up. App function and
design is subject to change.
6.1
Light Setup
1.
Open the app on your device.
2.
From My Systems page, select your pool.
3.
From the home page, choose the cog system icon
on the top right and select System Setup.
6.1.1
Assign Lights
1.
From the System Setup page, select Light Setup
and Assign Lights.
2.
From the Assign Lights pop up, choose proceed to
continue the process.
3.
On the Light the Zone Setup page, select a light
in order to move it to a different zone and follow
further instructions in the app.
NOTE: When exiting the Light Zone Setup page, the lights will
turn off.
NOTE: Lights have to be assigned to a zone in order to
rename the zone.
6.1.2
Name Light Zones
1.
Go to > System Setup > Light Setup > Zone
Name.
2.
From the Edit Zone Name pop up, enter the zone
name and choose OK..
Page 8
BLUE
Jandy
Infinite WaterColors
®
BLUE
LED1:
Continuosly
flashes
green when
communicating.
2 1
4 3
ORN
ORN
(niched only)
GND
RS485 to
Automation
14 VAC output 300W
App
®
|
Pool & Spa LED Lights
Installation and Operation Manual
™
6.2
Turn Lights On/Off
1.
Open the app on your device.
2.
From the My System page, select your pool.
3.
Choose the equipment page.
4.
Turn zone lights on/off by tapping the toggle to
the right of the desired zone.
6.3
Select Colors
1.
Open the app on your device
2.
From the My System page, select your pool.
6.3.1
Select Custom Color
1.
Go to > equipment page.
2.
From the equipment page, choose the zone you
want to change color.
3.
From that zones page, choose Custom Color.
4.
Choose your custom color from the color wheel.
5.
Choose Apply to apply the custom color to your
zone.
6.3.2
Preset Colors
1.
Go to the equipment page and select the zone you
want to change color.
2.
After selecting the zone, then choose from the list
of preset colors to apply that preset color to your
zone.
6.3.3
Preset Color Shows
1.
From equipment page, choose the zone you want
to change color.
2.
After selecting the zone, then choose from the list
of preset color shows to apply that preset color
show to your zone.
6.4
Adjust Brightness
1.
From the equipment page, select the sun icon on
the zone where you want to change to adjust the
brightness.
2.
Move the slider bar up or down with your finger
and then click apply to change the brightness.