Lexmark C543dn Kurzreferenz

Blättern Sie online oder laden Sie pdf Kurzreferenz für Drucker Lexmark C543dn herunter. Lexmark C543dn 4 Seiten. Color laser printer
Auch für Lexmark C543dn: Spezifikationen (6 seiten), Spezifikation (6 seiten), Spezifikationen (6 seiten), Spezifikationen (6 seiten), Spezifikationen (6 seiten), Datenblatt (6 seiten), Produktspezifikationen (6 seiten), Spezifikationen (6 seiten), Kurzanleitung (4 seiten), Handbuch (15 seiten)

Quick Reference

Loading paper and

specialty media

Loading the standard 250-sheet

tray

The printer has one standard 250-sheet tray (Tray 1) with an attached

manual feeder. The 250-sheet tray, the 650-sheet duo drawer, and the

optional 550-sheet tray support the same paper sizes and types and

are loaded in the same way.

Note: The optional 550-sheet tray is not available for all printer

models.

Pull the tray out.

Note: Do not remove trays while a job prints or while Busy

appears on the display. Doing so may cause a jam.

Squeeze the length guide tab inward as shown, and slide the

guide to the correct position for the paper size being loaded.

Note: Use the size indicators on the bottom of the tray to help

position the guide.

If the paper is longer than A4 or letter size, push the green tab at

the back of the tray to extend it.

Flex the sheets back and forth to loosen them, and then fan them.

Do not fold or crease the paper. Straighten the edges on a level

surface.

Load the paper stack with the recommended print side faceup.

Make sure the paper guides are secure against the edges of the

paper.

Note: Make sure that side guides are placed tightly against the

edges of the paper so that the image is registered properly on

the page.

Insert the tray.

If a different type or size of paper was loaded than the type or size

previously loaded in the tray, change the Paper Type or Paper Size

setting for the tray from the printer control panel.

Note: Mixing paper sizes or types in a tray may lead to jams.