AIRGOO AG-60 Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Handbuch für Töpferscheiben AIRGOO AG-60 herunter. AIRGOO AG-60 4 Seiten. Pottery wheel with foot pedal

knob counter clockwise with decrease the wheel speed. Maximum wheel speed is 300

rpm.

• Always make sure the knob is in the lowest setting when plugging in or turning on the

machine.

• Note: When the optional foot pedal is attached to the pottery wheel, the speed control

knob will be disabled.

FOOT PEDAL

• Your pottery wheel comes with the option of using the supplied foot pedal. To use the

foot pedal, be sure to unplug your machine and turn speed control knob to the lowest

setting. You can then plug in the foot pedal.

• When plugging in the foot pedal you must align the white dot on the machine portal with

the white dot on the foot pedal cord. Failure to do so will result in damage to the cords

metal prongs.

• When using the foot pedal, to speed up the wheel, press down, and to slow down the

wheel, depress the foot pedal.

• Note When foot pedal is attached, the speed control knob on front of LCD will be

disabled.

POWER CORD

• To operate the wheel safely, plug the 10 foot cord into a grounded (3-prong) AC outlet

and keep cord away from the wheel head. Always use a grounded outlet.

• Do not alter the plug in any way or use extension cords. To protect yourself against the

risk of fire or electric shock, do not allow cords or plugs to be immersed in water or other

liquids.

CLEANING

• Always turn off and unplug your pottery wheel prior to cleaning. Use water or a mild soap

and water solution or air hose to clean your wheel.

• Do not hose off or pressure wash your wheel as this may result in damage of wheel

motor and/or bearings.

• To protect your wheel, do not get any of the electronic parts wet or submerged when

clean.