Avaya 4610 Kurzreferenz-Handbuch - Seite 5
Blättern Sie online oder laden Sie pdf Kurzreferenz-Handbuch für IP-Telefon Avaya 4610 herunter. Avaya 4610 7 Seiten. Phone handling basics
Auch für Avaya 4610: Grundlagen der Handhabung (15 seiten), Benutzerhandbuch (8 seiten), Kurzreferenz-Handbuch (2 seiten), Kurzreferenz-Handbuch (2 seiten), Kurzreferenz-Handbuch (2 seiten)
Seite drucken
Redialing using a list of the last three numbers called:
1. Press the Redial (
numbers dialed and the prompt "Select number to dial." appears at the top of the display.
2. Press the Line/Feature button associated with the number you want to redial. If the call can
be dialed, the Phone application screen displays and the selected number dials
automatically. If the selected number cannot be dialed (for example, if all call appearance
lines are currently on Hold), all Redial entries are disabled. If you press a number for
redialing while in this state, an error beep tone sounds and no further action occurs.
3. Proceed with the call. A Call Log entry is created for this call.
Dialing a party using a Speed Dial button
Automatic dialing of pre-stored numbers is the most common method of automatic dialing.
You can set up Speed Dial buttons and select the party you want to call by pressing that
button.
(For more information see adding a speed dial
1. Press the SpDial softkey at the bottom of the display screen. The first six Speed Dial buttons
display, one name/number per button, and the prompt "Select entry to dial." appears at the
top of the display area.
2. If the party you want to call appears on the display, proceed to Step 3. If the party you want
to call is not shown, press the Page Right (
Continue until the number/party you want displays. You can also press the Page Left (
button to display the preceding page of entries.
3. Press the Line/Feature button associated with the name/number of the person you want to
call. The number of the selected person dials automatically.
4. Pick up the handset, activate the headset, or use the Speakerphone to proceed with the call.
5. Hang up the handset, deactivate the headset, or press the Speakerphone (
the call.
Automatically dialing a party using an administered Line/Feature button
Your System Administrator may have programmed individual numbers on Line/Feature
buttons (this is called Abbreviated Dialing). If so, such numbers display on the Phone
application screen with labels assigned by the System Administrator.
If the label for the number you want to call appears in the display area, press the appropriate
button,
or
Press the Page Right (
label of the party you want to call displays. Then press that button. The number dials
automatically and the screen displays the appropriate call appearance line as active.
) Feature button. The Redial screen displays the last three unique
) or Page Left (
button).
) button to display the next page of entries.
) button(s) below the display area until the
)
) button to end