Private Call
The Private Call feature is used to prevent any intrusions during the call. Private call can be activated
either before or during a call and will set the phone status to 'cannot be intruded' until you switch the
Private Call feature off.
If you place a call to an extension with Private Call on, you will hear the Number Unobtainable tone.
Note
Private call is not a default feature. If you require this option, contact your administrator.
Parking Calls
You can park one or more calls; allowing you to make and receive other calls. You can also arrange for
the parked call to be retrieved by another extension.
The system only allows calls to be parked for a short while before reconnecting them to the user who
parked the call; the default setting is 5 minutes. Once the set time is reached, the parked call will ring
back if your extension is idle.
Note
To park a call using the short codes, the call must first be put on Hold.
To park a call to be picked up by any extension:
Dial *37*N# - Where N is the slot id that you have assigned.
Inform your colleagues of the parked call and the slot id you have assigned.
To Un-park a call from another extension:
Dial *38*N# - Where N is the assigned slot id.
To Park a call to your local extension:
Dial *37#
When you park a call to your local extension, it is automatically given a slot id number based on
your extension number followed by 0. If you park another call, it is given your extension number
followed by 1 and so on up to 9. For example: if your extension is 201, the first parked call will be
given the slot id 2010.
To Un-park a call on your local extension:
Dial *38*# - If you have more than one call parked, the call parked first will be the first call to be
un-parked
4601 and 5601 User Guide
IP Office 4.0
15-601078 Issue 4 (12th December 2006)
System Features
Page 11
Seite drucken