Lexmark C935 Series Informationen - Seite 7

Blättern Sie online oder laden Sie pdf Informationen für Drucker Lexmark C935 Series herunter. Lexmark C935 Series 9 Seiten. Hard disk and non-volatile memory guide
Auch für Lexmark C935 Series: Broschüre (5 seiten), Handbuch Konnektivität (6 seiten), Einrichtung (2 seiten), Kurzreferenz (10 seiten), Handbuch drucken (4 seiten), Handbuch Medien (3 seiten), Handbuch zur Farbqualität (7 seiten), Handbuch zur Beseitigung von Staus (7 seiten), Handbuch zur Fehlersuche (11 seiten), Handbuch für Verbrauchsmaterial (2 seiten)

How to Perform a Complete Disk Wipe (Wipe Disk)

The Wipe Disk setting provides you with a tool for erasing all contents of a disk. This

feature can be accessed by entering the device Config Menu at the Lexmark device

control panel. The Wipe Disk function should be used when the Lexmark device is to be

retired, recycled, or otherwise removed from a customer's secure environment.

Warning: Wipe Disk removes a disk's data in such a way that it cannot be recovered.

The Wipe Disk (Secure) operation is a three-pass overwrite and may take up to nine

hours to complete.

1. Power off the device.

2. If your device has a touch screen, hold down the 2 and the 6 buttons, while

powering on the device; hold the buttons down until a clock or bar indicator

appears. If your device has a four line LCD display, hold down the check

mark (√) and the right arrow (>), while powering on the device; hold the

buttons down until a clock or bar indicator appears. Once the clock or bar

indicator appears, then you may release the buttons.

3. You should see the Config Menu appear on the device control panel.

4. To locate the Wipe Disk feature, press the down arrow until Wipe Disk

appears on the screen. Select Wipe Disk.

5. The screen should change to a page that displays the header Wipe Disk. The

screen should only display two functions, Wipe Disk (Fast) and Wipe Disk

(Secure). Select the feature that you would like to enable.

6. After the appropriate feature has been selected, the screen should change to

a confirmation page that displays the following prompt: Contents will be lost.

Continue? or A secure disk wipe takes many hours and content will be lost.

The confirmation screen will allow you to continue or cancel the wipe disk

operation.

7. When the process finishes, select the Back button.

8. Select the Exit Config Menu button and the device will return to a ready state.

Lexmark International, Inc.