Gardena 11000 SL automatic Betriebsanleitung - Seite 6

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Water Pump Gardena 11000 SL automatic herunter. Gardena 11000 SL automatic 10 Seiten. Submersible pump

Seite drucken
Manual operation :
1
3

5. Cleaning

Flushing the Pump :
Clean float switch :
3
B
z
5 a
5
Cleaning the suction
base and impeller:
8
9
6
The pump continues to operate regardless of the water level
when in manual operation mode.
2
1. Turn knob
2. Stand the pump on a firm surface
– or –
use a rope attached through the bore hole in the carrying
7
handle
3. Plug the power cable
6
8
The pumps are virtually maintenance-free.
After having pumped chlorinated swimming pool water or other
liquids leaving residues, the pump should be rinsed with clear
water.
1. Turn knob
2. Remove float switch cover
3. Clean float switch
Warning ! Electric shock !
A
Risk of injury due to electric shock.
V Disconnect the submersible pump from the mains
1. Unscrew the Phillips screw
0
off the suction base
2. Unscrew the 6 Phillips screws
off the pump.
3. Clean the suction base cover
4. Reinstall the suction base
Tip : It is often sufficient to simply remove the suction base
0 A
0
cover
For safety reasons a damaged impeller
changed by the GARDENA Service Centre.
3
to MAN.
2
to immerse the pump in a well or shaft.
1
into a mains socket.
3
to OPEN.
B
5
5
/
a.
before cleaning the suction base and impeller.
A
6
.
6
and clean the suction base cover
.
and pull the suction base cover
8
and pull the suction base
0
6
, suction base
and impeller
and screw in the Phillips screws
0
and suction base
9
can only be ex-
6
9
.
8
.
6
.
15