Gardena 21000 inox Betriebsanleitung - Seite 4
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Water Pump Gardena 21000 inox herunter. Gardena 21000 inox 12 Seiten. Submersible pump / dirty water pump
Seite druckenNote on 21000 inox
When you purchase your pump the swivel
feet are set to the flat suction position
(1 mm).
v For normal operation, turn the feet 180°
to 5 mm.
The pump is lifted 5 mm.
v Clear the outlet line before use.
Thermal protection switch
The pump is automatically switched off on
overheating by the built-in thermal motor
protector. After having cooled down, the
motor automatically switches on again (see
7. Troubleshooting).
3. Initial Operation
Hose diameter
a
7
Hose connection
7
of universal fitting
Hose connection
Connecting the hose :
12
38 mm (1 ¹⁄₂ " )
Do not cut off any nipples.
Best results in delivery capacity are achieved when using
50 mm (2 " ) hoses.
The universal fitting
in the previous table.
1. Cut off nipples of the universal fitting
to match the hose connection.
2. Screw the universal fitting
3. Connect the hose to the universal fitting
We recommend that you secure 50 mm (2 " ) and 38 mm (1 ¹⁄₂ " )
hoses additionally with a GARDENA Hose Clip Art. No. 7195
(for 50 mm) and Art. No. 7193 (for 38 mm).
7
Automatic deaerating valve
4
If the pump is half submersed, water may
come out of the ventilation holes
This is not a defect of your pump, but serves
to deaerate the pump.
50 mm (2 " )
Cut off nipple at
7
allows you to connect all the hoses listed
7
7
onto the pump.
The automatic
deaerating valve
eliminates any
air pockets in the
pump.
4
.
a
.
, which are not needed,
7
.