Gardena 7645 Betriebsanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Water Pump Gardena 7645 herunter. Gardena 7645 7 Seiten. Fountain pump set

Seite drucken

GARDENA Fountain Pump Set 500 S / 1000 S

Welcome to the Garden of GARDENA ...

Please read the Operating Instructions carefully and comply

with them. Use these operating instructions to familiarise yourself

with the pump, its proper use and the safety instructions.

For safety reasons, children under 16 as well as persons

not familiar with these operating instructions must not use this

pump.

v Keep these operating instructions in a safe place.

Contents

1. Where to use your GARDENA Fountain Pump set . . . . . . . . . 8

2. Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3. Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

4. Initial Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

5. Storing your Fountain Pump Set . . . . . . . . . . . . . . . . . . . . . . 10

6. Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

7. Trouble-shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

8. Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

9. Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

10. Service / Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

1. Where to use your GARDENA Fountain Pump set

Intended Use:

The GARDENA Fountain Pump is intended for domestic use.

It is not designed for operating watering equipment and

accessories or irrigation systems. The pump can be used both

indoors and outdoors.

Please note

The GARDENA Fountain Pump is not suitable for continuous

operation in industrial applications. Corrosive, easily

combustible, aggressive or explosive substances (such as

gasoline, petroleum or nitro thinners), or saltwater must

not be pumped, nor must foodstuffs or drinking water.

2. Safety instructions

Electrical Safety:

DANGER ! Electric shock !

v Always disconnect the pump

from the mains before under-

taking any work on it.

The pump should be operated via a residual

current device with a residual current rating

of ≤ 30 mA (DIN VDE 0100-702). The pump

must be placed on solid, even ground.

v Please ask your electrician for his advice.

Mains power cables should not have a smaller

cross-section than a rubber sheathed cable

of the designation H05 RN-F3G0,75.

Extension cables must meet the requirements

of DIN VDE 0620. Check line voltage.

Data indicated on the type plate must match

technical data of the mains supply.

Please unplug the pump after operation and

before carrying out any maintenance works.

The pump must not be operated when there

are people in the water.

Swimming pools and garden ponds should

be designed according to international and

national design regulations.

v Please consult a professional electrician.

Before operating the pump, look to see if there

is any damage to the pump (esp. regarding

power cable and plug).

The connection cable of the pump cannot be

replaced. If the cable is damaged the pump

must be scrapped.

Do not use the power cable to carry the pump

or to pull the plug out of the socket.

3. Assembly

Fit the pump:

1. Screw the nozzle tube

2. Plug the nozzle tube

tube

3. Plug further nozzle tube(s)

required.

4. Plug the fountain socket

5. Insert the desired fountain insert into the fountain socket

Cascade into a bayonet socket.

b) / c) Push in the Water Bell / Fleur-de-Lis until they click

audibly home.

a) cascade

Side outlet

Other features (e. g. a gargoyle) can be connected to the side

outlet of the nozzle tube

v The water quantity can be adjusted at the side outlet of the

nozzle tube

hole

Protect the power cable from heat, oil and

sharp edges.

User instructions:

Never let the pump run dry; running dry

generates heat and will damage the pump.

The temperature of the liquid used must not

be below 4 °C or above 35 °C.

Sand and other abrasive substances in the

liquid cause increased wear and reduce the

output of the pump.

Please observe the local noise prevention

regulations.

with side outlet into the socket

with regulating hole into the nozzle

into the nozzle tube

into the top nozzle tube

Only on the 1000 S

b) water bell

c) jets of water

[9 mm / 13 mm (1/2")] .

by adjusting the extent to which the regulating

of the nozzle tube

is covered by the side outlet