Avaya J129 Kurzreferenz
Blättern Sie online oder laden Sie pdf Kurzreferenz für IP-Telefon Avaya J129 herunter. Avaya J129 4 Seiten. Ip office telephone
Auch für Avaya J129: Kurzreferenz (3 seiten), Kurzreferenz (5 seiten), Benutzerhandbuch (4 seiten), Benutzerhandbuch (6 seiten), Kurzreferenz-Handbuch (3 seiten), Kurzreferenz (4 seiten)
Seite drucken
Avaya J129 IP Phone in third-
party call control setup Quick
Reference
Avaya J129 IP Phone overview
The Avaya J129 IP Phone is a SIP-based phone intended
to be used for basic business communications. The phone
supports two-call appearances with a single-line call
display.
Physical specifications
• Single call appearance
• A 128 x 32 pixels graphical LCD
• Three softkeys
• Dual 10/100 network ports
• Power over Ethernet class one device
• Magnetic Hook Switch
Icons on the phone
The following table lists the icons used in the Avaya J129
IP Phone:
Icon
Description
Line indicator; first call
appearance
Line indicator; second call
appearance
More than 10 recent
missed calls
Recents- Outgoing call
Recents- Missed call
Recents- Incoming call
Outgoing recents MDA
Icon
Release 4.0.1
Issue 1
April 2019
©
2019, Avaya Inc.
All Rights Reserved.
Getting Started
Entering the provisioning server
address
Use this procedure to enter the provisioning server
address where asked to do so. For example, when the
phone is first plugged into the network.
Table continues...
Get the provisioning server address from the system
Description
administrator.
Missed call
Check
MDA active
New call setup
Voicemail
Checkbox off
Checkbox on
Active conference
Conference on hold
Contrast
EC500
Failover
Radio button off
Handling calls
Radio button on
Making a call by using the dial mode
Feature unavailable
Use this procedure to make a call without lifting the
Call forward
handset or pressing Speaker.
Handset
Set the dial mode on the phone to Auto or Manual.
Hold
Phone lock
Ringer on
Ringer off
Speaker
Making a call without using the dial
mode
Do not disturb
Making a call from the local contacts list
Use this procedure to make a call from the local contacts
list. In third-party call control setup, the local contacts are
synchronized with the network file server.
1. On the Configure Provision Server screen, press one
of the following softkeys;
• Config: To enter the provisioning server address.
• Never: To never prompt for the provisioning server
address.
• Cancel: To cancel the prompt and display the Log
Out screen. You can also press Back to cancel the
prompt and display the Log Out screen.
2. In the Prov Server field, enter the provisioning server
address. The address can be in the form of a
numerical IP address or an alphanumeric fully
qualified domain name.
Tip:
To enter the dot symbol (.) in the field, press the
alphanumeric softkey to toggle to the
alphanumeric mode.
3. Press Save.
The phone reboots.
• If the dial mode is set to Auto, dial the required
number of digits.
The phone initiates the call when the inter digit timer
times out.
• If the dial mode is set to Manual, dial the number and
press the Call softkey.
1. Lift the handset or press Speaker.
2. Press the digits on the dial pad.
The phone initiates the call when the inter digit timer
times out.
1. Press Main Menu > Contacts.
1