Gardena CW Pump 2000/2 Li-18 Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Water Pump Gardena CW Pump 2000/2 Li-18 herunter. Gardena CW Pump 2000/2 Li-18 16 Seiten.
Seite drucken
To connect the hose via the connection nipple
[ Fig. A1 / A2 / A3 ]:
When using a 25 mm (1") hose, the pump has the maxi-
mum delivery capacity.
25 mm (1")- and 19 mm (3/4") hoses connected with
(2)
a connection nipple
must be fastened, for example
with a GARDENA Hose Clamp Art. 7192 / 7191.
Hose diameter
25 mm (1")
GARDENA Hose Clamp
Art. 7192
[ Fig. A1 ]
[ Fig. A2 ]
Hose connection
Detach nipple
(a)
at
1. Screw the connection nipple
onto the pump. (With 25 mm (1") hoses, first detach the
connection nipple
(2)
at
2. Slide the hose onto the connection nipple
secure it e. g. with a GARDENA Hose Clamp
Art. 7192 / 7191.
To connect the hose via the GARDENA Connection
System [ Fig. A4 ]:
19 mm (3/4")- / 16 mm (5/8") and 13 mm (1/2") hoses can
be connected via the GARDENA Connection System.
3. OPERATION
DANGER! Risk of injury!
Injury when the product starts accidentally.
v Remove the battery before you adjust or
transport the product.
To charge the battery [ Fig. O1 / O2 ]:
CAUTION!
Overvoltage damages the battery and the
battery charger.
v Make sure that you use the correct mains voltage.
For the GARDENA Battery Pumps Art. 1748-66 /
1749-66 there is no battery in the scope of delivery.
Before you use the battery the first time, the battery must
be completely charged.
The lithium-ion battery can be charged in any state of
charge and the charging process can be disconnected at
any time without to damage the battery (no memory
effect).
(8)
1. Open the cover
.
2. Push both locking buttons
(D)
from the battery holder
3. Connect the battery charger
4. Connect the battery charger cable
When the charging control lamp
flashes green the battery is being charged.
14
19 mm (3/4")
Art. 7191
[ Fig. A3 ]
Do not detach
nipple
(2)
with the washer
(4)
(a)
.
(2)
and
(A)
and remove the battery
.
(C)
into a mains socket.
(E)
to the battery
(Lc)
at the charger
Hose diameter
13 mm (1/2")
16 mm (5/8")
19 mm (3/4")
v Connect the hose via the relevant GARDENA
Connection
To connect the telescopic pipe (Art. 1749) [ Fig. A5 ]:
We recommend the use of a GARDENA Hose
Connector for connecting a garden hose:
– Art. 18215 for 13 mm (1/2") and 16 mm (5/8") or
– Art. 18216 for 19 mm (3/4"). With the use of 19-mm-
(3/4")-hose line, the pumping quantity is the greatest.
The telescopic pipe can be adjusted between 59 – 78 cm.
1. Screw the telescopic pipe
(1)
tor
. Make sure that the washer
(5)
necting thread
2. Loosen the threaded collar
3. Adjust the telescopic pipe
4. Tighten the threaded collar
The telescopic pipe
Valve
(7)
. The shut-off valve
adjustment of the pump performance.
When the charging control lamp
illuminates green the battery is completely charged
(Charging time, see 7. TECHNICAL DATA).
5. Examine the charge status regularly while you charge.
6. When the battery
(B)
the battery
from the charger
7. Disconnect the charger
Battery charging indicator [ Fig. O3 ]:
Battery charging indicator during charging:
100 % charged
66 – 99 % charged
33 – 65 % charged
0 – 32 % charged
Battery charging indicator during operation:
v Push the button
66 – 99 % charged
33 – 65 % charged
11 – 32 % charged
0 – 10 % charged
(B)
Control panel [ Fig. O4 ]:
On / Off button:
(B)
.
v Push the On / Off button
When the pump is switched on, the Mode-LED indicator
illuminates in the last setting selected (memory function).
Pump connection
GARDENA Pump Connection
Set
GARDENA Tap Connector
GARDENA Hose Connector
GARDENA Pump Connection
Set
(3)
onto the pump connec-
(4)
lies in the con-
(3)
of the telescopic pipe
.
(6)
of the telescopic pipe
(3)
to the desired height.
(6)
again.
(3)
is fitted with a GARDENA Shut-Off
(7)
can also be used for fine
(Lc)
at the charger
(B)
is completely charged, disconnect
(C)
.
(C)
from the mains.
(L1)
(L2)
(L3)
,
and
illuminate (for 60 sec.)
(L1)
(L2)
(L3)
and
illuminate,
(L1)
(L2)
illuminates,
flashes
(L1)
flashes
y
on the battery.
(L1)
(L2)
(L3)
,
and
illuminate
(L1)
(L2)
and
illuminate
(L1)
illuminates
(L1)
flashes
(s)
on the control panel.
Art. 1750
Art. (2)902
Art. (2)916
Art. 1752
(3)
.
flashes