Gardena WSP 7000 Betriebsanleitung - Seite 4
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Water Pump Gardena WSP 7000 herunter. Gardena WSP 7000 14 Seiten. Submersible pump / dirty water pump
Auch für Gardena WSP 7000: Betriebsanleitung (8 seiten), Betriebsanleitung (14 seiten)
Seite drucken
Instructions for
submersible pump 7000
When you purchase your pump the swivel
feet are set to the flat suction position
(1 mm).
v For normal operation, turn the feet 180°
to 5 mm.
The pump is lifted 5 mm.
v Clear the outlet line before use.
Thermal protection switch
The pump is automatically switched off on
overheating by the built-in thermal motor
protector. After having cooled down, the
motor automatically switches on again (see
7. Trouble Shooting).
3. Initial Operation
Hose diameter
a
b
7
Hose connection
7
of universal fitting
Hose connection
Automatic deaerating valve
4
If the pump is half submersed, water may
come out of the ventilation holes
This is not a defect of your pump, but serves
to deaerate the pump.
13 mm ( ¹⁄₂ " )
16 mm ( ⁵⁄₈ " )
19 mm ( ³⁄₄ " )
Cut off topmost
a
nipple at
.
The following connection kits are required for 13 mm to
19 mm connections:
13 mm ( ¹⁄₂ " ):
GARDENA Pump Connection Set, Art. No. 1750
16 mm ( ⁵⁄₈ " ):
GARDENA Tap Connector, Art. No. (2)902,
and GARDENA Standard Hose Connector,
Art. No. (2)916
19 mm ( ³⁄₄ " ):
GARDENA Pump Connection Set, Art. No. 1752
Best results in delivery capacity are achieved when using 38 mm
(1 ¹⁄₂ " ) hoses.
The automatic
deaerating valve
eliminates any
air pockets in the
pump.
25 mm (1 " )
Do not cut off
Cut off top two
any nipples.
4
.
38 mm (1 ¹⁄₂ " )
b
nipples at
.
13