Avaya Norstar M7310 Kurzreferenz-Handbuch
Blättern Sie online oder laden Sie pdf Kurzreferenz-Handbuch für IP-Telefon Avaya Norstar M7310 herunter. Avaya Norstar M7310 3 Seiten. Digital deskphone for ip office
Seite drucken
M7310 Digital Deskphone layout
This section describes the location and function of the buttons and
other features on the face of the M7310 Digital Deskphone.
M7310 layout
A
Shift button
For using the top function
of a dual-memory button..
B
Display
Shows the time and date,
call and feature
information.
C
Dual-memory buttons
Stores any two features
or autodial numbers.
D
Display buttons
The label for display
buttons appear in capital
letters on the bottom of
the display. Display
buttons change with each
feature you use.
E
Feature button
Starts or ends a feature..
F
Release button
Ends an active call or
feature.
G
Hold button
Places the active call on
hold.
H
Dial pad
Used to input phone
numbers and features.
I
Memory and line buttons Buttons with indicators
for one touch dialing,
feature operation, or line
access.
J
Volume control
Raises or lowers volume.
K
Indicators
Appears beside an active
line or feature.
Using display buttons
Three display buttons appear directly below the display. When
active, these buttons appear in capital letters on the second line of
the display. In this guide, display buttons appear as underlined,
capital letters: for example, OK.
Telephone Setup
Use the following tasks to set up the M7310 Digital Deskphone.
Adjusting the contrast level
Use the following task to adjust the contrast level of the LCD display.
1. Press Feature * 7.
2. Press UP or DOWN to view the contrast levels.
3. Press OK to select a level.
Changing the ring type
Use the following task to change the ring type on the telephone.
1. Press Feature * 6.
2. Press 1 through 4 or NEXT to select the ring type. A preview
tone is played.
3. Press OK to store the ring type.
Programming memory buttons
Memory buttons are the buttons with labels other than line or
Handsfree buttons. Memory buttons store telephone numbers or
feature codes to give you one-touch dialling or feature activation.
There are two types of memory buttons: single-memory and dual-
memory. Single-memory buttons are the buttons with indicators
other than line or Handsfree buttons. Dual memory buttons have two
programmable functions. To use the top function, press the shift
button, then press the dual-memory button. To use the bottom
function, press the dual-memory button.
You can change the function of a memory button by programming it
with a new number or feature. If you have programmed a memory
button with an extension number, the indicator comes on when the
number is busy.
Avaya IP Office supports duplicate programming. For example, you
can program a single number or feature to multiple memory buttons.
Press Feature * 0 to check the programming of a memory or line
button.
Programming an external autodial number
You can program a memory button with a new number or feature.
1. Press Feature * 1.
2. Press the memory button you want to save the number to.
3. Dial the external number you want to save to the memory button.
4. Press OK to store the number to the telephone memory.
5. Label the memory button with a button label strip.
Programming an internal autodial number
You can program an internal autodial number to a memory button.
1. Press Feature * 2.
2. Press the memory button you want to store the number to.
M7310 Digital Deskphone
for IP Office Quick
Reference Guide