Gardena 9809 Betriebsanleitung - Seite 4

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Trimmer Gardena 9809 herunter. Gardena 9809 16 Seiten. Turbotrimmer
Auch für Gardena 9809: Benutzerhandbuch (9 seiten)

Seite drucken
Gardena 9809 Betriebsanleitung
Supply lines must be lighter than:
– common rubber lines (H 05 RNF),
if rubber-insulated;
– common PVC-coated lines (H 05 WF),
if insulated with PVC.
Only connect the device to a mains circuit which
is equipped with a residual current device (RCD)
with a maximum release current of 30 mA.
In Switzerland the use of a residual-current
device is obligatory.
3. Assembly

Assembling the trimmer:

2
1
ß
R
4
3
8
7
9
6
5
14
Warning! This machine produces an electro-
magnetical field during operation. This field may
under some circumstances interfere with active
or passive medical implants. To reduce the risk
of serious or fatal injury, we recommend persons
with medical implants to consult their physician
and the medical implant manu facturer before
operating this machine. Do not use the product
when a thunderstorm is approaching.
CAUTION!
The trimmer may only be operated provided that the
protective cover
1. Pull the lock
belonging to the
1
additional handle
2
of the snap-fits
belonging to the
3
additional handle
2
grooves
pointing forwards, snap
ß
R
them into the holder
2. Place both halves of the impeller
around the lower groove
trimmer head
and close until
7
they audibly engage.
3. From the front, push the plant
guard
into the upper groove
8
of the trimmer head
so, ensure that the installed bow
can rotate freely (i. e. insert the
bow with the kink pointing
upwards).
4. Place the protective cover
top of the trimmer head
5. Turn the protective cover
can be pushed over the trimmer
head entirely (the two arrows
are directly across from each
other).
6. Rotate the protective cover
clockwise until it audibly engages.
is assembled.
0
, push in both
and, with the
.
4
5
of the
6
ß
A1
9
. In doing
7
on
0
.
7
until it
0
,
ß
ß
A1
A2
anti-
0
ß
A2
0